-
×
Kondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
1 × $45.00
Subtotal: $45.00
Audio
Ambient LTC-OUT35 – Timecode Cable PushPull-5-pin (Lemo-compatible) to 3,5mm TRS w/ 40dB PAD
Signal Attenuation: Includes a 40 dB built-in pad to safely drop timecode TTL levels down to match camera microphone input levels.
Channel Routing: Wired specifically to send the timecode track to the right channel (ring).
Durable Build: Uses high-grade polyurethane outer cabling and dense braided shielding instead of standard PVC to prevent interference and wire breakage.
$107.00
The LTC-OUT35 Timecode Output Cable by Ambient Recording is a LEMO 5-pin to 3.5mm TRS right-angle plug. The cable has a 40 db pad for TC TTL level to microphone input for DSLR, wired to ring, right channel. The length of this cable is 16″ (40 cm) long.
Related products
-
Audio
Shure ULXD4D Dual-Channel Digital Wireless Receiver (H51: 534 to 598 MHz)
- For Large Venues & A/V Installations
- 2 x Digital Audio Channels, 1 Rackspace
- 64 MHz Tuning Range
- Expandable up to 60 Channels
- 2 x Ethernet/Dante Ports
- 2 x RF Cascade Ports
- Audio Summing
- Secure AES-256 Encryption
SKU: SHR-ULXD4DH51 -
Audio
Tentacle Sync TRACK E Timecode Audio Recorder
For YouTube, Vlog, Music, Journalism
Lav Mic with Locking 3.5mm Connector
Wireless Control and Monitoring via App
Timecode I/O via 3.5mm Connector
Wirelessly Sync Multiple TRACK E Units
Wireless Timecode Sync to SYNC E
16GB MicroSDHC Card (32GB Supported)
32-Bit Floating Point & 24-Bit Recording
48 kHz Mono Recording
10 h Built-In Rechargeable BatterySKU: TTS-TR1 -
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio
AUDIX A10X Studio Quality Earphones for Precise Imaging & Low Distortion
The A10X Earphones are designed for the ultimate immersive listening experience.
At the heart of the earphone is a dynamic low-mass moving coil assembly and composite beryllium diaphragm delivering over ten octaves of balanced frequency response and extended bass. With exceptional imaging, isolation and phase coherence, the A10X accurately presents the full details of your music.
Features
- 10 mm dynamic driver with beryllium diaphragm for precise imaging and low distortion
- High-energy balanced response with extended bass
- Optimized silicone ear tips (S, M, L) for strong seal and isolation
- Gold-plated MMCX connectors allow for 360-degree rotation for ideal positioning
- Reinforced wire wrap near the connector holds the earphone confidently in place
- Premium silver-plated, oxygen-free copper cable in a durable soft coat jacket with gold-plated 3.5 mm (1/8 in) plug
SKU: ADX-A10X
