Ambient QRTT – Quick-Release Tip for QRT
For Snap-On/Snap-Off Mic Assembly
Rigid, Rattle-Free Joint
Self-Locking and Self-Locating Action
Fits 3/8″ Microphone Booms
Made of Aluminum with ABS Plastic Cover
$49.01
Ambient Recording QuickLok Quick Release Mount is designed to provide snap-on/snap-off microphone assembly mounting onto boompoles. The system consists of a mounting stud and two tips that join in a twist-lock motion for easy connection and release. The QuickLok is a convenient tool for quick microphone assembly and quiet, rattle-free operation. The QuickLok fits any 3/8″ thread found on all microphone booms.
Related products
-
Audio
Tentacle Sync TRACK E Basic Box
For YouTube, Vlog, Music, Journalism
Locking 3.5mm Microphone Input
Wireless Control and Monitoring via App
Timecode I/O via 3.5mm Connector
Wirelessly Sync Multiple TRACK E Units
Wireless Timecode Sync to SYNC E
Supports up to 32GB MicroSDHC Card
32-Bit Floating Point & 24-Bit Recording
48 kHz Mono Recording
10-Hour Built-In Rechargeable BatterySKU: TTS-TR1-B -
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio, Audio accessories
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
The RODE DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed to help minimize wind noise and improve audio recording clarity in windy environments.
The DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, whilst ensuring a secure fit specifically suited to the VMP+ Microphone.
The DeadCat VMP+ is only compatible with the VideoMic Pro+ (released September 2017). For other VideoMic Pro models please see the DeadCat VMP and DeadCat VMPR.
SKU: ROD-DEADCATVMP+ -
Audio
AUDIX F50 All Purpose Vocal Microphone Cardioid
AFFORDABLE ALL-PURPOSE VOCAL MICROPHONE
The f50 multipurpose vocal dynamic microphone embodies a tight and uniformly controlled Cardioid polar pattern which assists in isolating the vocals from the instruments on stage. The f50 is also available with a noiseless, magnetic on/off switch (f50S).
Its warm, natural sound reproduction, resistance to feedback, and ability to handle high SPLs without distortion allows the f50 dynamic vocal microphone to be utilized in a variety of live and studio applications. The f50 Cardioid microphone is an entry-level, all-purpose vocal microphone for small to midsize PA systems.
MODEL VARIATION
f50S dynamic vocal microphone, with On/Off switch.
What’s in the box?
- 1x f50 Vocal Microphone
- 1x Mic Clip
- 1x Carrying Pouch
SKU: ADX-F50
