Designed to work with the company’s series of ACN-CL Lockit wireless synchronizers, the Ambient Recording SYNC-OUT is a cable that outputs wordclock signal. You’ll find a 5-pin push/pull LEMO connection at one end, and a 90° BNC connector at the other. The cable measures approximately 15.7″ in length.
Ambient SYNC-OUT – Sync-Cable PushPull-5-pin (Lemo-compatible) to BNC
For ACN-CL Lockit Compact Synchronizer
Wordclock Cable
5-Pin LEMO Connector
Right-Angle BNC Connector
15.7″ Cable Length
$121.20
Related products
-
Audio
Tentacle Sync TRACK E Basic Box
0 out of 5(0)For YouTube, Vlog, Music, Journalism
Locking 3.5mm Microphone Input
Wireless Control and Monitoring via App
Timecode I/O via 3.5mm Connector
Wirelessly Sync Multiple TRACK E Units
Wireless Timecode Sync to SYNC E
Supports up to 32GB MicroSDHC Card
32-Bit Floating Point & 24-Bit Recording
48 kHz Mono Recording
10-Hour Built-In Rechargeable BatterySKU: TTS-TR1-B -
Audio
Shure ULXD4D Dual-Channel Digital Wireless Receiver (H51: 534 to 598 MHz)
0 out of 5(0)- For Large Venues & A/V Installations
- 2 x Digital Audio Channels, 1 Rackspace
- 64 MHz Tuning Range
- Expandable up to 60 Channels
- 2 x Ethernet/Dante Ports
- 2 x RF Cascade Ports
- Audio Summing
- Secure AES-256 Encryption
SKU: SHR-ULXD4DH51 -
Audio
Kondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
AudioKondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
0 out of 5(0)3.5mm mono cable made for RODE VideoMicro, Link Filmmaker Kit, and Wireless Go for Canon C70 & BMD Pocket 4K/6K Camera & Video Assist 4K.
Connect a RODE microphone or other audio equipment to your camera with this Mini-XLR Male to 3.5mm Mono Audio Cable. The cable measures 35.5cm (14″) in length and features a straight mini-XLR male connector on one end and a 3.5mm mono cable connector on the other end.
SKU: KBL-KB-MINIXLRRODE -
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
0 out of 5(0)PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio
Tentacle Sync TRACK E Timecode Audio Recorder
0 out of 5(0)For YouTube, Vlog, Music, Journalism
Lav Mic with Locking 3.5mm Connector
Wireless Control and Monitoring via App
Timecode I/O via 3.5mm Connector
Wirelessly Sync Multiple TRACK E Units
Wireless Timecode Sync to SYNC E
16GB MicroSDHC Card (32GB Supported)
32-Bit Floating Point & 24-Bit Recording
48 kHz Mono Recording
10 h Built-In Rechargeable BatterySKU: TTS-TR1
Focusrite Scarlett 16i16 USB-C Audio/MIDI Interface 4th Generation
Deity C14 Locking 3.5mm To 5 Pin Lemo Cable
Deity S-Mic 2 Shotgun Microphone
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+





