Sync timecode to and from the RED KOMODO camera with the Lockit Timecode and Sync Cable from Ambient Recording, which features two LEMO-type connectors, a yellow boot 5-pin and a green boot 9-pin. The 16″ polyurethane cable is resilient against twisting and uses a braided shield to better protect against interference.
Ambient TC-SYNC-KMD – Lockit Sync / Timecode Cable for RED Komodo
16″ Timecode / Sync Cable
5-Pin to 9-Pin LEMO-Type Connectors
For RED KOMODO
$185.00
Related products
-
Audio
PSC Garfield Hush Lav Lavalier Microphone Quieting Sleeves Black 15 Pack
0 out of 5(0)Hush Lavs are precut and drilled lavalier mic quieting sleeves used for recording clean audio with radio lavalier mics. They minimise clothing noise and thereby achieve your goals. They are designed for use with the Sanken COS-11 and Countryman B3 and B6 Lavalier Microphones, and fit most other small lavalier microphones.
SKU: PSC-SGARHL-BK -
Audio, Video production hardware
Deity Tc-1 Wireless Timecode Box
0 out of 5(0)- Generate/Jam All SMPTE Timecode Formats
- Bluetooth Wireless Control from Phone
- 2.4 GHz Wireless Control from Other TC-1
- Locking 3.5mm Timecode Port
- Onboard Omnidirectional Microphone
- 28-Hour Battery Life
- Drift: <1 Frame per 72 Hours
- Bright OLED Display
- Works with Sidus Audio Mobile App
- Range: 30′ (2.4 GHz), 250′ (Bluetooth)
SKU: DEI-09.TC-1 -
Audio
Kondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
AudioKondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
0 out of 5(0)3.5mm mono cable made for RODE VideoMicro, Link Filmmaker Kit, and Wireless Go for Canon C70 & BMD Pocket 4K/6K Camera & Video Assist 4K.
Connect a RODE microphone or other audio equipment to your camera with this Mini-XLR Male to 3.5mm Mono Audio Cable. The cable measures 35.5cm (14″) in length and features a straight mini-XLR male connector on one end and a 3.5mm mono cable connector on the other end.
SKU: KBL-KB-MINIXLRRODE -
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
0 out of 5(0)PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6
Shure ULXD4D Dual-Channel Digital Wireless Receiver (H51: 534 to 598 MHz)





