The amazing PMP1680S Powered Mixer packs tremendous power (2 x 800 Watts stereo or 1,600 Watts in Bridged mode), while maintaining an incredible power-to-weight ratio. These mixers employ high-efficiency Class-D technology and a state-of-the- art switch-mode power supply, which significantly reduces weight and heat. The 10-channel PMP1680S features 8 high-quality mic preamps, 2 stereo channels, dual 24-bit Multi-FX processors with 100 awesome presets including studio-class reverbs, delays, pitch shifter and various multi-effects, plus a 7-band stereo graphic EQ with our proprietary FBQ Feedback Detection System ? for the ultimate in feedback-free performance.
Behringer PMP1680S Powered PA Mixer 10 Channel 1600W
For Bands, DJs, and Special Events
8-Channel (10-Input) Powered Mixer
2 x 800W Class-D Amplifiers (4 Ohms)
8 High-Quality Microphone Preamps
Dual Multi-FX DSP with 100 Presets
3-Band EQ on Each Input Channel
Dual 7-Band Graphic EQs
+48V Phantom Power for Condenser Mics
Voice Cancellation for Instant Karaoke
Includes Power Cord, Rackmount Brackets
$659.00
Related products
-
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
0 out of 5(0)PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio
Tentacle Sync E Timecode Generator – Standard Set of 2
0 out of 5(0)2 Timecode Generator Units
iOS/Android App Bluetooth 5.0 Control
Alll SMPTE-12: 23.98, 24 & 25 (50) fps
29.97, 29.97DF & 30 (60) fps
3.5mm Mic Port (TC In/Out) & USB-C Port
High-Precision TCXO, <1 Frame/Day Drift
2 Sync Software Licenses (macOS)
Locking 3.5mm Tentacle Cable Clamp
Master Clock & Jam-Sync Modes
Up to 50-Hour Runtime, Fast ChargingSKU: TTS-TE2-MK2 -
Audio
Tentacle Sync TRACK E Basic Box
0 out of 5(0)For YouTube, Vlog, Music, Journalism
Locking 3.5mm Microphone Input
Wireless Control and Monitoring via App
Timecode I/O via 3.5mm Connector
Wirelessly Sync Multiple TRACK E Units
Wireless Timecode Sync to SYNC E
Supports up to 32GB MicroSDHC Card
32-Bit Floating Point & 24-Bit Recording
48 kHz Mono Recording
10-Hour Built-In Rechargeable BatterySKU: TTS-TR1-B -
Audio, Audio accessories
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
0 out of 5(0)The RODE DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed to help minimize wind noise and improve audio recording clarity in windy environments.
The DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, whilst ensuring a secure fit specifically suited to the VMP+ Microphone.
The DeadCat VMP+ is only compatible with the VideoMic Pro+ (released September 2017). For other VideoMic Pro models please see the DeadCat VMP and DeadCat VMPR.
SKU: ROD-DEADCATVMP+
Nikon Nikkor Z 24-200mm F/4-6.3 VR
Brother DK11203 White Label 300 (17x87mm) labels per roll
SmallRig Top Handle for Sony XLR-K1M / K2M / K3M and Panasonic DMW-XLR1 / XLR2
Wooden Camera Top Plate (Sony FX9)
Kaiser Fototechnik 4455 Extension Arm
Nikon Nikkor Z 24mm F/1.8 S
Canon PFI-3100CO Chroma Optimiser Ink For PRO -160ml
Setwear Glove EZ-Fit X-Large Black
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid








