Benro A48FD Aluminium Monopod VT2 3-Leg Base Flip Lock
Each Benro Video Monopod is based on eighth-generation design of single leg tubes and the choice of flip or twist leg lock mechanisms.
The aluminium A48FD features a VT2 3-Leg locking base, allowing this monopod to act as a pho-tripod, providing 3 solid points of contact with the ground. The four leg sections have quick lock leg levers, with built in anti-rotation for fumble free setup.
The included ball joint gives smooth panning & tilting, which can be locked for use with an additional pan head. All this is built to withstand a whopping 20kg payload, reaching more than 1.6 metres when fully extended.
This lightweight flip lock video monopod is ideal for small cameras. The A48FD Video Monopod features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel.
$149.00
PRODUCT WEIGHTS & MEASUREMENTS
Product Length (cm) : 56
Product Width (cm) : 7.3
Product Height (cm) : 7.3
Product Weight (kg) : 1.07
SPECIFICATIONS
Leg Material : Aluminium
Series : 4
Leg Sections : 4
Leg Lock Type : Flip Lock
Leg Diameter 1 (mm) : 36.2
Leg Diameter 2 (mm) : 32.4
Leg Diameter 3 (mm) : 28.6
Leg Diameter 4 (mm) : 25.2
Maximum Payload Capacity (lb) : 44.09
Maximum Height (cm) : 164
Minimum Height (cm) : 56
Maximum Height w/Column Retracted (cm) : N/A
Maximum Height w/Column Extended (cm) : N/A
Maximum Height Converted to Monopod (cm) : N/A
Closed Length (cm) : 56
Independent Leg Spread : N/A
Base Mount Thread : 3/8″-16
Forward Tilt Range : N/A
Back Tilt Range : N/A
Pan Lock (Video) : N/A
Tilt Lock (Video) : N/A
Pan Drag (Video – Fixed , Stepped or Continuous) : N/A
Counterbalance (Video – # of Steps or Fixed) : N/A
Panning Range : 360
Quick Release Type : N/A
Foot Mount : N/A
Foot Type : Locking Three Leg Folding Base
Foot Size (mm) : N/A
RECOMMENDED ACCESSORIES
Recommended Accessory 1 : S4
Recommended Accessory 2 : S4H
Recommended Accessory 3 : S6
Related products
-
Monopods
Benro A38FD Aluminium Monopod VT2 3-Leg Base S2 Head & QR4 Plate
The Benro A38FDS2PRO is a travel-friendly flip lock video monopod provides a 2.5kg payload capacity ideal for small cameras and smartphones. The S2PRO Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. Made for small cameras and smartphones alike, the S2PRO is a versatile flat base video head.
The S2PRO video head supports up to 2.5kg. Equipped with a 60mm flat base with a 3/8″-16 thread, the S2PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan & tilt lock, fixed pan & tilt drag, bubble level and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S2PRO is +90°/-70°. The forward 90-degree tilt helps with table top setups. The S2PRO also features an improved CNC machined aluminium sliding camera plate.
SKU: BEN-A38FDS2 -
Monopods
Manfrotto Monopod Video XPRO No Head 68/192cm 8kg Payload 4S Alu 1/4 & 3/8” thread on top
The new XPRO Monopod Aluminium 4-section is a professional full fluid video monopod made to satisfy videographers who leverage the height of their monopod to get above crowds and to achieve a wide range of shooting angles.
These state-of-the-art Manfrotto legs have inherited the perfect combination of rigidity and locking safety of professional tripod ranges, like the 190 collection and the 055 collection.This monopod is equipped with Manfrotto’s full fluid base (MVMXPROBASE) featuring the innovative FLUIDTECH system that makes Manfrotto XPRO Monopod+ the first of its kind on the market to feature 3D fluidity. The FLUIDTECH video base enables the ultimate shooting smoothness on pan, tilt and swivel for an expanded range of perspectives. The three retractable feet make it extremely portable when folded and allow the monopod to be easily carried everywhere.
The new D-shaped aluminium tubes greatly improve anti-rotation resistance throughout the monopod, following the videographer’s rapid rotation movements. Combined with the Quick Power Lock (QPL) which strongly locks the lever onto the monopod tube’s flat side, this eliminates unwanted jerky movements.
Thanks to the newly designed leg warmer which provides exceptional grip and the dual 1/4” – 3/8” camera fixing screw, this new generation of monopods is handier, faster and more versatile out in the field.The MVMXPROA4 replaces the Manfrotto MVM250A
SKU: MAN-MVMXPROA4 -
Monopods
Benro A38FD Aluminium Monopod VT2 3-Leg Base Flip Lock
Each Benro Video Monopod is based on an eighth-generation design of single leg tubes and the choice of flip or twist leg lock mechanisms.
The aluminium A38FD features a VT2 3-Leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel. This allows the monopod to act as a pho-tripod, providing 3 solid points of contact with the ground. The four-leg sections have quick lock leg levers, with built-in anti-rotation for fumble-free setup.
The included ball joint gives smooth panning & tilting, which can be locked for use with an additional pan head. All this is built to withstand a whopping 18kg payload, reaching more than 1.5 metres when fully extended.
SKU: BEN-A38FD -
Monopods
Benro A48FD Aluminium Monopod VT2 3-Leg Base Flip Lock S6PRO Head
The Benro A48FDS6PRO is a travel-friendly flip lock video monopod provides a 6kg payload capacity ideal for Mirrorless and HDSLR cameras. The S6PRO Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel.
Ideal for a small video cameras and mirrorless rigs with accessories, the S6PRO video head supports up to 6kg. Equipped with a 65mm flat base with a 3/8″-16 thread, the S6PRO is a versatile creative tool allowing you to mount the head separately on sliders, jibs, or monopods. Other features include: pan & tilt lock, continuous pan & tilt drag, 6-step counterbalance (0-5), illuminated bubble level and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S6PRO is +90°/-75°. The forward 90° tilt helps with table top setups.
The S6PRO also features metal ratchet style knobs and an improved CNC machined aluminium sliding camera plate.
SKU: BEN-A48FDS6PRO -
Monopods
Benro A48FD Aluminium Monopod VT2 3-Leg Base Flip Lock S4PRO Head
The Benro A48FDS4PRO is a travel-friendly flip lock video monopod provides a 4kg payload capacity ideal for Mirrorless and HDSLR cameras. The S4PRO Video Monopod Kit features a 3-leg locking base with ball joint for smooth and stable shots along with reverse folding legs for compact travel.
The S4PRO head features a 2-step Counterbalance (1&2) to properly balance the entire camera rig for smoother operation. The independent pan lock allows you to pan smoothly without having to turn the entire monopod. Other features include: pan & tilt lock, fixed pan & tilt drag, bubble level and two 1/4″-20 accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so. Tilt range for the S4PRO is +90° /-75°. The forward 90° tilt helps with table top setups.
The S4 PRO also features metal ratchet style knobs and an improved CNC machined aluminium sliding camera plate. Carry case included.
SKU: BEN-A48FDS4PRO
