Bubblebee The Twin Windbubbles Beige Size 3
The Bubblebee Windbubble consists of an outer shell of the finest imitation fur (we do like them animals) and an inner core of nothing. And this ‘nothing’ is exactly what makes the bubble so special. The air enters the bubble for a short visit, finds it rather dull, and quickly leaves again without harming the microphone inside. See all Windbubbles
So instead of the wind hammering on the microphone and making those horrible, “I’m in the middle of a hurricane,” sounds, the capsule is kept in a calm space and allowed to perform at its best.
Size 3; elastic opening: 40 mm (1.57”). Built for microphones with a diameter of 5,0-9,0 mm: Sanken COS-11 (with metal windscreen); Countryman EMW; DPA 4060 (with metal windscreen); Sennheiser MKE 2 (with MZW 2 windshield), ME2, ME2-US (with windscreen), ME2-II.
$66.00
Related products
-
Microphone Accessories
Shure Microphone A2WS-BK Foam Windscreen for SM57 (Black)
0 out of 5(0)Shure A2WS-BK
The Shure A2WS-BK is a high-quality foam windshield for the Shure SM57 545 and 546 series microphones. Perfect for helping to reduce pops, and unwanted wind-noise from being picked up.SKU: SHR-A2WS-BK -
Microphone Accessories
Rycote Triangular Black Mic Flag
0 out of 5(0)Triangular Black Mic Flag
Product Code: 107302
A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/
SKU: RYC-RY107302 -
Microphone Accessories
Rycote Single Square White Mic Flag
0 out of 5(0)Square White Mic Flag
Product Code: 107307
A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.
Main Benefits:
- Fits A Wide Range Of Microphones
- Lightweight But Tough
Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.
Customising your mic flag in Australia & New Zealand
We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.
Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.
Fits A Wide Range Of Microphones
With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.
Lightweight But Tough
Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.
MIC FLAG BROCHURE – CLICK HERE
Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility
MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/
SKU: RYC-RY107307 -
Microphone Accessories
Shure A1WS Foam Windscreen for Instruments Microphones (Grey)
0 out of 5(0)The Shure A1WS is a high-quality foam windshield for the Shure Beta56, Beta57, and all 515 series microphones. Perfect for helping to reduce pops, and unwanted wind-noise from being picked up.
SKU: SHR-A1WS -
Microphone Accessories
Rycote Overcovers Adv, White (Pack)
0 out of 5(0)Overcovers Advanced White (Pack)
Product Code: 066308
Contents: 25 x Stickies, 23mm Round. 5 x Fur Discs, 26mm Round
Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.
Key features
- Large size (26mm) ideal for DPA Concealers
- Supplied with Stickies Adv Round, at 23mm also bigger than ‘Originals’
MyMic – https://rycote.com/microphone-windshield-shock-mount/lavalier-solutions/
SKU: RYC-RY066308
PSC Garfield Hush Lav Lavalier Microphone Quieting Sleeves Black 15 Pack
Shure A58WS-BLU Foam Windscreen for SM58 / Beta58 (Blue)
Pelican 1010 Micro Case Black With Black
Rycote Micro Windjammer -30 Uses
SmallRig 2203B Cage for Blackmagic Design Pocket Cinema Camera 4K & 6K
Shure A58WS-YL Foam Windscreen for SM58 / Beta58 (Yellow)
BlackRapid Bert Breathe
Haida Red-Diamond ND3.0 (1000x) Filter - 10 Stop 100x100mm
Manfrotto Messenger Bumblebee M-30 PL DSLR + 15" Laptop/Tablet Int. 31x42x12cm
Shure RK143G SM58 Replacement Grille
Okko Pro / CPL Circular Polarizer Filter 62mm
Benro GoKnob 2
Jupio Sony NP-F750/F730 7.4V 4400mAh Lithium Ion Battery
Tenba Tools Tool Box 8 Black
Setwear Pouch Utility 7 x 3" Black
SmallRig 2069 90 Degree 15mm Rod Clamp
CRC Gasket Stripper Aerosol 300g
SmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
Rycote Overcovers Adv, Black (Pack)
Giottos RA1900 Rocket Air Blower Large Black
Okko Pro / CPL Circular Polarizer Filter 43mm
Shure A26X Extension Tube 3 inch for Desk Stands
Beamz PANDORA1200
Avenger E250 Pin Baby Double 5/8in Long 15.24cm
Spots Unlimited Gaffers Control GC28-2
Peak Design Capture Camera Clip v3, Silver - no plate
Wooden Camera Shoulder Rig V3 (Pro, Brown Leather)
Backstage Mag C-Stand Holder (4)
Rycote Back-To-Back Clips
3 Legged Thing QR11-FBC L Bracket Copper Full Body
Avenger A630B Stand Light Minimax Alu 90/327cm 9kg Payload Weighs 2.2kg
Benro GoRail 2 | 70cm Long
Benro Tortoise Short Centre Column #0
Rosco SL1 Mix RGB Panel
Shure ULXD4D Dual-Channel Digital Wireless Receiver (H51: 534 to 598 MHz)
Brother CZ1005 Tape Cassette 50mm x 5m White Label Roll
Manfrotto Lastolite BG Vintage Ink/Sage 1.5x2.1m Double Sided Background
Rycote Triangular Black Mic Flag
Okko Pro / Slim UV Protector Lens Filter 52mm
Dynacore D-MS-PG Mount Tiny V-Lock for camera rail
Shure A57AWS Locking Windscreen for Beta57 Beta57 or Beta57A (Black)
Okko Pro / CPL Circular Polarizer Filter 52mm
Think Tank Digital Holster 40 V2.0
Okko Pro / CPL Circular Polarizer Filter 55mm
Shure A7WS Foam Windscreen for SM7, SM7A & SM7B (Black)
SmallRig Cage Kit for Sony Alpha 6700 4336
Inca Lens Cap 49mm
OKKO Magnetic Lens Caps 77mm
Shure A58WS-RD Foam Windscreen for SM58 / Beta58 (Red)
SmallRig 2844 Sony FX9/FS7/FS7 MK2 Top Handle Special Screw
RoboCup Olive
Rode Vlogger Kit iOS Edition with VideoMic ME L
Shure A1WS Foam Windscreen for Instruments Microphones (Grey)
Cotton Carrier Everything Bracket
Rode PSA1+ Pink
Benro RAMA1 Adjustable Arm Small
Haida M10 Adapter Ring 62mm - EOL
Deity V-Mic D4 Mini For Camera Or Phone With Aux
Rode VXLR 3.5mm Mini Jack to XLR Adapter
Haida NanoPro Variable Neutral Density 1.2 to 2.7 Filter (72mm)
Shure EAC64CL Replacement Cable for SE Earphones Clear
Wooden Camera Top Plate (Sony FX9)
Nanlite FL-20G Fresnel Attachment with barndoors Bowens Mount
Think Tank Airport Commuter
Rycote Super-Shield, Windjammer (Small)
Rycote Neumann Tlm 103 Foam (Single)




