Chimera 3530 Grid Medium 40 degree
Lighttools Soft EggCrate Fabric Grids help control light spill without affecting softness or color temperature. They’re collapsible, portable and extremely lightweight. Available in a range of degree options from 20 to 60 degrees, with smaller degrees offering tighter beam spread.
– Helps control light spill from lightbanks
– Does not alter softness or color temperature
– Folds down to compact size
Angelbird AV PRO SD MK2 128GB V90 – 1 PACK0 out of 5(0)
Designed for high bit depths, frame rates, and resolutions, including Full HD, 4K+, and 3D video, as well as raw and continuous burst photography in DSLR and drone systems, the 128GB AV Pro Mk 2 UHS-II SDXC Memory Card from Angelbird features a storage capacity of 128GB and takes advantage of the UHS-II bus to support sustained read speeds of 280 MB/s and sustained write speeds of 260 MB/s, as well as sequential read speeds of 300 MB/s and sequential write speeds of 280 MB/s. This card has also been designed with the V90 Video Speed Class rating, which guarantees minimum write speeds of 90 MB/s.
UHS-II media achieves its speed through an extra row of pins and while this card has been designed for cameras that are UHS-II / V90 compatible, it may be used in devices that do not support UHS-II / V90. However, bear in mind that this card will then default to your device’s speed class and bus rating, such as UHS-II and V60, which supports minimum write speeds of 60 MB/s, UHS-II and V30, which supports minimum write speeds of 30 MB/s, or UHS-I and U3, which also supports minimum write speeds of 30 MB/s. If your device does not support U3, this card is compatible with the U1 and Class 10 standards, each of which guarantees minimum write speeds of 10 MB/s.
Built for extreme conditions, Angelbird’s 128GB AV Pro Mk 2 UHS-II SDXC Memory Card is protected against water, shock, x-rays, magnets, and temperatures ranging from -13 to 185°F. Also featured is ECC data reliability, wear leveling, and power management for low power usage. A built-in write-protect switch helps to safeguard your content from being erased.SKU: ABD-AVP128SDMK2V90$345.00
Angelbird AtomX CFast Adapter0 out of 5(0)
Record your camera video onto a CFast 2.0 card when using an Atomos monitor/recorder with the CFast 2.0 to Atomos AtomX SSDmini Adapter from Angelbird. The adapter features the AtomX SSDmini form factor and fits into an Atomos Ninja V+, Ninja V, Shogun 7, or Neon monitor/recorder. It provides a slot for one CFast 2.0 Type I card, so you can record onto smaller and cheaper media.
The adapter supports high-performance video recording in a wide variety of formats, including ProRes and Avid DNx up to DCI 4K60 resolutions and ProRes RAW up to 6K30 or 4K120 resolutions. The adapter connects to the monitor with a SATA interface, and it is also compatible with the optional Angelbird USB Type-C-to-SATA adapter when you need to offload your footage.SKU: ABD-ATOMXMINICFAPK$126.00
Angelbird ATOM SSDmini 500GB0 out of 5(0)
This 500GB Angelbird AtomX SSDmini is custom-designed to fit into a variety of Atomos products while maintaining high data throughput rates necessary for a 4K workflow. It fits perfectly into the Atomos Ninja V, Ninja Flame, Ninja Inferno, and Shogun Inferno. An optional adapter handle enables using this SSD with the Shogun Studio, Sumo 19, and Sumo 19M.
Although 20% smaller than an average SSD, the SSDmini makes no concession to size, and it features formidable up to 560 MB/s sequential read speed with 540 MB/s sustained read speed, and up to 520 MB/s sequential write speed with 500 MB/s sustained write speed. Incorporating Stable Stream technology, you don’t drop any frames. The SATA III connector enables connecting to a standard SATA III port when it is time to transfer your footage.SKU: ABD-ATOMXMINI500PK$359.00
3 Legged Thing QR7 Quick Release Plate0 out of 5(0)
The QR7 Release Plate is designed for ultimate stability. With a 38mm x 62mm Arca Swiss compatible base, the QR7 offers an adjustable camera screw slot, to give you more alignment options for your camera. Fits into a standard Arca Swiss style clamp, and has a strap connector at one end. With a milled stainless steel camera screw, 2 x 2.5mm hex retaining bolts and a precision machined anodised finish. You can rely on the QR7 to keep your tripod secure.SKU: 3LT-QR7$57.00