Visual Departures Steadybag Jr Model 3 Camera Support 225g Blue Subtotal: $47.50
Stabilisers
Cinekinetic Fasty Straps
5′ long polyester seat belt webbing Cinesaddle Fasty Straps are designed to work with the Cinesaddle Stirrups or Anchors to secure your Cinesaddle to a moving or stationary platform. The Fasty Straps feature a buckle that allows you to secure the strap from loosening once you have cinched it tight.
You loop the Fasty strap around a Stirrup (not included) and put it under tension. Or when working with a Cinesaddle Anchor (not included), you can thread the end of the Anchor through the Fasty Strap’s buckle to hold it fast.
$15.00
Related products
-
Stabilisers
Manfrotto MVAQR MOVE Quick release system
MOVE is the first quick-release system to help increase your pace on set and make switching set-ups effortless.
It is designed to reduce downtime when switching between tripods, motion control gear, and stabilizers in fast paced, creative environments.
At the core of this revolutionary system is a flat base and plate set-up that creates a universal connector.
The flat base has a diameter of 60mm and mounts a standard 3/8” thread that is highly versatile, working with different support combinations (tripod, slider, monopods etc.).
The plate comes with a standard 3/8” and 1/4” top attachment screw to guarantee an easy connection with a huge range of products. It also features an anti-rotation pin to work safely and securely in all shooting configurations, and a 1/4” adapter seat.
By adding the bases to the various supports, and the plate to the camera systems, users can quickly switch their gear from one set-up to the next without having to stop to screw and unscrew different plates into position.MOVE is made of hard-anodized, machined aluminium, so it’s strong enough to cope with an impressive payload capacity of up to 20kg/44.09 lbs. With its slimline design and 220gr/0.49 lbs weight, it’s also the lightest quick release system on the market.
Manfrotto’s new X LOCK system increases the rigidity of the entire kit at the mounting point through its intuitive twist locking mechanism.
MOVE is not a simple universal connector, but an innovative product for everyone looking to improve their performance and creative range while also improving on-set or shoot efficiency.
SKU: MAN-MVAQR -
Stabilisers
Tilta Armor man 3.0 Arm (L)
This shock-absorbing stabilized left arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-L -
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Cable Pulley
This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
SKU: TIL-ARM-T03-OCP -
Stabilisers
Tilta Armor man 3.0 Overhead Configuration Gimbal Ring Adapter Clamp(Pair)
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
SKU: TIL-ARM-T03-ORAC -
Stabilisers
Manfrotto MVGBF-CF Fast GimBoom Carbon Fibre
GimBoom is the revolutionary new FAST boom developed by Manfrotto with universal fitting for your Gimbal.
From ground level to overhead position (drone perspective), the new Manfrotto GimBoom allows you to get more versatile and flexible use from your Gimbal, raising your production values to the next level.
Thanks to its standard 3/8” and 1/4” top attachment screw, the GimBoom guarantees an easy connection with your Gimbal. It’s exceptionally compact (hand baggage size with 51cm minimum operating height) and lightweight (800g.) And, thanks to its carbon-fibre construction – capable of taking a payload of 6.5 kg at maximum extension – the GimBoom is also incredibly strong.
The unique FAST Twisting Lock makes it quick and simple to deploy and extend, allowing the user to control the entire boom with a single gesture. With two risers and three telescopic sections, the full extended length is more than double (1.15m/45.27in) the minimum operating length (0.51m/20.07in), while the intuitive graphic design means locking and unlocking the boom have never been easier.
Three thread connectors arranged at 120° on the top of the middle section enable the GimBoom to pair with dedicated GimBoom accessories, with a handy rubber cap to avoid damage when placing it on the ground.
SKU: MAN-MVGBF-CF
