Fixed white CCT: 3.200 K
Dimmable via on-board potentiometer (on/off)
Four blade framing system, each shutter blade is adjustable for radial position and angle
Guaranteed flicker-free operation
CE approved
IP rating: 20
Coemar LEDko T Basic CRI 90, On/Off Local Dimmer Pot, 140w
The LEDko Basic has been specifically projected for applications in which there is no need for an accurate DMX control of the fixture. The LEDko Basic engine is the same as of the standard LEDko version but it can be dimmed with local potentiometer and used in a on/off basis only (no DMX control).
Both Tungsten (3.200 K) and Daylight (5.600 K) versions available.
Related products
-
Fixed profile lighting
Beamz BTS200 Profile Spot Zoom 200W White DMX
0 out of 5(0)Beamz BTS200
The Beamz BTS200 is a very powerful 200W COB LED profile spotlight with manual zoom, designed to replace traditional profile spots. Featuring an adjustable zoom range of 18 ? to 38 ? it’s therefore very suitable for replacing the most common lenses (19 ?, 26 ? and 36 ?). Equipped with a high-quality optical system and strong ABS housing make it a compact and lightweight unit. Featuring four blades, a gobo lock and supplied with a filter frame and safety cable.
Thanks to the powerful 200W LED, the BTS200 has an ultra-low power consumption while maintaining a surprisingly high output.
Used in DMX control mode or via Artnet connection with almost silent cooling. The BTS200 makes an ideal fixture for use in theaters, studios and concert halls.SKU: BMZ-BTS200$1,299.00 -
Fixed profile lighting
Coemar LEDko FullSpectrum 6 HD, RGBWLA, DMX/RDM, 200w
0 out of 5(0)Designed with HD electronic and a new LCD display, this spot profile projector is the evolution of the LEDko. The HD electronic with advanced LED controller enables a smooth 20 bit dimming and color mixing through 6 colors, with a color rendering index of the white range greater than 90.
New LCD display with additional buttons for quick settings of the main functions
20 bit color mixing through 6 colors (Red, Green, Blue, White, Lime, Amber)
Continuously variable CCT with CRI greater than 90
Smooth 16 bit dimmer (3 different curves selectable digitally processed at 20 bit)
Guaranteed flicker-free operation (20.000 Hz LED refresh rate)
Pre-set and customizable color libraries
Full range of fixed or zoom optics available
Compatible with soft edge profile – Fresnel or PC lenses – and with various lens tubes already existing on the marketSKU: COE-F012Q000A -
Fixed profile lighting
Chauvet DJ EVE E-50Z White LED Ellipsoidal Profile Spot
0 out of 5(0)The Chauvet DJ EVE E-50Z White is an LED Ellipsoidal/profile spotlight. Its primary use is highlighting stage areas and project patterned gobos. Featuring a robust professional design with ultra-low power consumption it has a surprising output thanks to the warm white 50W LED power source.
SKU: CDJ-EVEE-50ZWH$899.00 -
Fixed profile lighting
Coemar LEDko FullSpectrum Series 2, RGBW, DMX/RDM, 200w
0 out of 5(0)LEDko, the spot profile projector winner of major awards with Coemar patented technologies.
Available in the following versions:
• LEDko T and D: fixed white LED COB source in two different CCT, either Tungsten (approx. 3.200 K) or Daylight (approx. 5.600K)
• LEDko VariWhite 2: variable white fixture from 2.700 to 6.500 K
• LEDko FullSpectrum 2: based on a RGBW arrayThe white versions are available with different levels of CRI (80, 90, 96).
Given the tradeoff between the level of CRI and the correlated light output, the standard fixture mounts a CRI 90 white LED chip.However, a CRI>95 – LEDko Studio version – is suggested whenever the color rendering has priority versus the general light output (for example an HD broadcast application or museum installations).
Finally, a CRI 80 is suggested for all those installations in which a higher light output is preferred (for example outdoor architectural installations).
Warmly welcomed when first introduced, the new VariWhite 2 version is based on a proprietory variable white LED array, designed to achieve high CRI level (above 95) with a wide spectrum of CCT ranging from 2.700 up to 6.500 K. This version provides great flexibility and guarantees a constant output throughout the CCT range.
The FullSpectrum is the result of several years of the Coemar R&D team focusing on resolving the typical issues linked with the use of LED chips, such as multiple shadows aberrations, pixelation and poor color mixing. In order to guarantee a high output at all levels and color mix, the LEDko FullSpectrum is based on a 4 channels LED array (Red, Green, Blue and Warm White 6.500 K). Along with a multitude of colors and pastel shades, the end-user can use the LEDko FullSpectrum to obtain a white range from 3.200 to 10.000 K with a CRI level above 90 without multiple shadows.
SKU: COE-F011H000A -
Fixed profile lighting
Coemar LEDko T DIM Display CRI 90, Mains Dimmable, 200w
0 out of 5(0)LEDko DIM is the phase dimmable version of the iconic LEDko.
This version can be powered by traditional dimmers and therefore represents a perfect refitting solution in all installations where traditional dimmers are still in use.
An external dimming knob allows this version to be controllable through traditional dimmers, DMX or in a stand-alone basis.
Both Tungsten (3.200 K) and Daylight (5.600 K) versions available.SKU: COE-F035C000A