The Core SWX Hypercore NEO 9S 98Wh V-Mount Battery is a compact 14.8V, 98Wh lithium-ion battery that supports a constant 12A draw and peak draw of 16A. With this high output, the battery is designed for cine and broadcast applications; but, of course, it can be used for virtually all other applications as well. At only 4.7″ in height and weighing just 1.4 lb, it’s also highly suited for gimbal, drone, and other mobile applications. The Hypercore NEO 9 Mini has the ergonomic design, large backlit LCD, and protective over-molded rubberized housing that Hypercore batteries have come to be known for over their past releases, but this NEO 9 Mini version is a lot more advanced.
Core SWX Hypercore NEO 9S Mini 98Wh V-Mount Battery
NEO 16A Peak with 12A draw
Firmware upgradable battery packs through USB
UN38.3 Certified for air travel safe transportation
New backlit multipurpose LCD
View battery vitals through RFID reader on the battery
Intergrated Smart P-Tap
Rates for 2000 cycles with a 2 year warranty
Rubberised housing to protect against accidental drops
Storage mode built-in
Hibernation mode when not in use after 48 hours
$410.00
Related products
-
V-Lock and B-Mount batteries
Fxlion BM-HV300 B-Mount Battery 28.8V 293Wh
0 out of 5(0)28V B-Mount Battery
The ultra volume energy ratio design, use high power cells, rechargeable Li-ion battery, no memory effect.
With 2*D-Tap,1*USB-A and 1*USB-C multiple outputs options for equipment power supply.
Maximum 250W/10A output can power high voltage camera and high power lighting.
Build in smart PCB for over-heat, over-charge, over-discharge and over-current protections.
5-level indicators.
Build in smart communication system, can display the battery voltage / battery capacity / operating time / working current on the
camera with communication function.
More safe and compatible structure, with rubber corners can adapt to falling in the work without damaging the shell.
Use special materials for battery negative and positive can bear the temperature up to 230℃, The problem of high-temperature
damaged components caused by high current discharge is solved.
Use professional B-mount or USB-C charger to charge B-mount battery.
D-Tap,USB-A and USB-C ports with dust cap design.SKU: FXL-BM-HV300 -
V-Lock and B-Mount batteries
Dynacore DHB-150 Battery V-Lock 26V 150Wh
0 out of 5(0)To use these, you must also purchase a Dynacore D-HB26 Safety Adapter V-Lock 26V for each battery.
- Voltage: 26V
- 150Wh/5.8Ah capacity
- Max Output: 200W
- Max Output Current: 20A
- Max Input Current: 5A
- Operating Temp: -30C
SKU: DYN-DHB-150 -
V-Lock and B-Mount batteries
Fxlion BP-7S270 Battery V-Lock 26V 270Wh
0 out of 5(0)The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won’t be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.
With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps – you can get a maximum of 15 Amps Output.
The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity.
A 4-level indicator shows you the remaining capacity. There’s a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.
SKU: FXL-BP-7S270 -
V-Lock and B-Mount batteries
Dynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
V-Lock and B-Mount batteriesDynacore DS-150SI Battery V-Lock Regular 14.8V 150Wh with built in charger
0 out of 5(0)● Internal Charger Battery V-Mount.
● Lightweight, compact, high-performance Lithium-ion battery pack.
● It can be charged by itself without using an external charger. The LED indicator will light on from 1 LED to 5 LEDs during charging, and all off when fully charged.
● The five-step LED power status indicator shows accurately remaining battery capacity.
● Industry-standard Power Tap& USB output(5V, 2A) can fit on-board Camera Light and other accessories. Before using the USB output, long-press the LED check button for 3 seconds to activate it.
● Input Voltage AC90V~240V 50~60Hz, apply to the global power grid.
● Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over-current, outside circuit short and non-equilibrium an unconventional situation.
● Non-memory effect.
● Environment-friendly: No poisonous elements
● Dynacore Batteries are manufactured according to CE, ROHS standardSKU: DYN-DS-150SI