The Core SWX Powerbase Edge Sony L-series Battery Cable allows you to power devices that use Sony L-Series batteries from the Core SWX Powerbase EDGE battery. The cable runs 15cm long and features an L-Series dummy battery on one end and a barrel connector for the Powerbase EDGE on the other.
Core SWX Powerbase Edge Sony L-series Battery Cable
Use with Sony L-Series Devices
Sony L-Series Dummy Battery
Connect to Core SWX Powerbase EDGE
6″ Length
$55.00
Related products
-
Battery adapters and DC couplers
Chauvet DJ Freedom Flex Battery
0 out of 5(0)Chauvet DJ Freedom Flex Battery
The Chauvet DJ Freedom Flex Battery is a premium lithium ion battery pack, for use with any Freedom Flex unit. It’s tool-less design offers quick and easy battery replacement for Freedom Flex fixtures.SKU: CDJ-FREEDOMFLEX-BATTERY$269.00 -
Battery adapters and DC couplers
Dynacore D-HB26 Safety Adapter V-Lock 26V
0 out of 5(0)Dynacore D-HB26 is a safety adaptor for 26 Volt V-Lock products
This adaptor allows the wiring of your 26 volt batteries to not work if accidentally installed on a 14.4 volt system.
Installing a 26 volt battery accidentally on a 14.4 Volt product will potentially overpower these items causing failure. Using these adaptors mean that you are protected from this happening. Please contact us for further details.
SKU: DYN-D-HB26$139.00 -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24$289.00 -
Battery adapters and DC couplers
Nanlite BH-FZ60V Battery handle V-Mount
0 out of 5(0)Achieve long runtimes by powering the Forza 60 with a V-mount battery.
The Nanlite BH-FZ60V allows you to run a Forza 60 or Forza 60B from a V-Mount battery. The BH-FZ60V battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B, and a V-Mount buckle to mount the battery.
The Nanlite BH-FZ60V V-mount battery adaptor can be mounted on a light stand, and also includes a handle to enable the Forza 60 to be operated hand-held, ideal for run and gun filmmaking.
The Nanlite Forza 60 V-Mount battery handle is only compatible with 14.8V V-Mount batteries.
Forza 60 runtime from a 100Wh V-Mount battery is approximately 100 minutes.
SKU: NAN-NNBHFZ60V$35.00 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
0 out of 5(0)- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B$59.00