Fxlion FX-B01-B02D4 D-Tap Multiplier/Splitter 4 Way 45cm

1. The plate fits Sony NP-F type batteries to provide greater battery life for BMPCC 4K & 6K.
2. It provides different output ports, including a 12V DC output port and a 7.4V DC output port.
3. LED indicator for low battery warning.
4. Rubber pads on the bottom for a more stable installation.
5. Two Charging Cables – LP-E6 Dummy Battery Cable and a DC to 2 Pin LEMO Cable.

Nanlite NP-F550 Battery Grip with USB Type-C Cable.

This Grip allows you to run your Pavotube 6C off a NPF 550 battery (not included)

D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A). 
Designed to work with equal power batteries where a larger capacity is preferred

LCD Display indicates Output Voltage

The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery Low

Output is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)

A Hexagon connector can be mounted to a stand using  a super clamp or convi clamp.