-
×
Nanlite Parabolic Softbox 150cm Bowens Mount
1 × $315.00 -
×
Tether Tools Case Relay Camera Power System
1 × $215.00
Subtotal: $530.00
Battery adapters and DC couplers
Godox ML-60IIBi Light Handle With Battery Case
Requires two optional NP-F970 batteries
Lightweight handle for ML-60IIBi
Portable power source for ML-60IIBi
$56.06
AK-B01 is designed to take two NP-F970 batteries (sold separately).
Is it used as a handle and portable power source for the ML60IIBi ensuring continuous filming, irrespective of your location or setup.
Related products
-
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Grip
The optional Blackmagic Pocket Battery Grip lets you replace the camera’s standard LP‑E6 battery with two L‑series batteries so you can shoot for over 2 hours on a single charge! That’s a massive battery life, in a design that integrates with the camera itself and can be used as a single unit. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray that holds 2 L‑series batteries, the Pocket Battery Grip also makes it easier to hold the camera on longer shoots because it increases the grip area of the handle. You can also charge the batteries in the grip via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT -
Battery adapters and DC couplers
Nanlite BH-FZ60 Battery handle NPF
A handheld grip, battery buckle, and low mount stand all-in-one.
This clever Nanlite battery mount holds two Sony NP-F (L series) batteries to power the Nanlite Forza 60. The battery handle also doubles as a low-mount light stand.
The BH-FZ60 handle also makes it easy to handhold the Foza 60 for lighting moving subjects, for light painting, and for creating a ‘wash of light’ effect in your video.
The battery handle grip can be mounted on a light stand when you wish to power your Nanlite Forza 60 from NP-F batteries.
The BH-FZ60 battery handle includes a 5.5mm DC-out cable to connect to the DC-in port on the Nanlite Forza 60 or Forza 60B.
SKU: NAN-NNBHFZ60 -
Battery adapters and DC couplers
Dynacore D-SA V-Lock to Gold Mount Adaptor
It may convert the V-plate to the Gold Mount bracket. It offers a solution to allow the use of Gold Mount batteries on V-Mount cameras.
It can also be used as a charger adapter, enabling you to charge Gold Mount batteries on V-lock chargers.
- Lock Gold Mount battery to the Gold Mount side of the D-SA, then the battery converts into V-Mount.
- Lock V-Mount side of D-SA with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 120×84×24.5mmSKU: DYN-D-SA -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Nanlite BT-BA-SNP/DC Battery adaptor NPF
Attach a pair of NPF batteries to extend the runtime of your Pavotube 15C or 30C.
The Nanlite BT-BA-SNP/DC can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube or Forza. The 15V DC output is designed for the Pavotube 15C, and Pavotube 30C, Forza 60, and Forza 60B.
A pair of NPF970 batteries mounted onto this adaptor will provide 88Wh of capacity. That is nearly as much as a small (98Wh) V-Mount battery.
SKU: NAN-NNBASNPDC
