Gravity GMSTM1B Microphone Table Clamp
The Gravity MSTM 1 B microphone table clamp firmly attaches to desk or podium tops with a maximum thickness of 45 mm. It is made of 4 mm steel with a plastic tipped set screw and 3/8″ threaded bolt for mic clip, mic clamp or gooseneck mounting.
$20.00
Related products
-
Audio, Video production hardware
Deity Tc-1 Wireless Timecode Box
0 out of 5(0)- Generate/Jam All SMPTE Timecode Formats
- Bluetooth Wireless Control from Phone
- 2.4 GHz Wireless Control from Other TC-1
- Locking 3.5mm Timecode Port
- Onboard Omnidirectional Microphone
- 28-Hour Battery Life
- Drift: <1 Frame per 72 Hours
- Bright OLED Display
- Works with Sidus Audio Mobile App
- Range: 30′ (2.4 GHz), 250′ (Bluetooth)
SKU: DEI-09.TC-1 -
Audio
Kondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
AudioKondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns
0 out of 5(0)3.5mm mono cable made for RODE VideoMicro, Link Filmmaker Kit, and Wireless Go for Canon C70 & BMD Pocket 4K/6K Camera & Video Assist 4K.
Connect a RODE microphone or other audio equipment to your camera with this Mini-XLR Male to 3.5mm Mono Audio Cable. The cable measures 35.5cm (14″) in length and features a straight mini-XLR male connector on one end and a 3.5mm mono cable connector on the other end.
SKU: KBL-KB-MINIXLRRODE -
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
0 out of 5(0)PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio, Recording Microphones, Studio Condenser Microphones
Shure PGA27 LC Studio Condenser Microphone
Audio, Recording Microphones, Studio Condenser MicrophonesShure PGA27 LC Studio Condenser Microphone
0 out of 5(0)The Shure PGA27 LC is a professional studio condenser microphone designed to give you clear and great sounding vocal recordings. Easy to use and features a large diaphragm, perfect for vocals. Includes suspension cage and protective case.
SKU: SHR-PGA27LC -
Audio
Fender AudioBox GO
0 out of 5(0)Fender AudioBox Go
The Fender AudioBox Go is a portable, high-performance 2 x 2 USB-C audio interface designed for creators who need professional-quality recording anywhere. Its XLR mic/line combo input with switchable +48V phantom power handles vocal and instrument recording with clarity, while the dedicated TS instrument input delivers plug-and-play tone for guitars, basses, and line-level sources.
Bus-powered and ultra-portable, the AudioBox Go integrates seamlessly into home studios, desktop setups, or mobile rigs. Compatible with Fender Studio, Fender Studio Pro, and most other audio apps, it’s ready for recording, mixing, and producing music or podcasts right out of the box.
Professional 24-bit / 96 kHz converters and low-noise preamps ensure every recording is crisp and detailed. The ¼-inch stereo headphone output and balanced TRS main outputs give you flexible monitoring options, while the Mix control lets you dial in low-latency, real-time tracking for precise performance.
- 2 x 2, 24-bit / 96 kHz USB-C audio interface
- XLR mic/line combo input with switchable +48V phantom power
- Dedicated TS instrument input for guitar or bass
- ¼-inch stereo headphone output for clear, detailed monitoring
- Two balanced ¼-inch TRS main outputs for studio monitors or powered speakers
- Studio-grade 24-bit / 96 kHz converters for clear, detailed audio
- Bus-powered, portable design for home or mobile setups
- Compatible with Fender Studio, Fender Studio Pro, and most other audio apps
- Ideal for home studios, mobile recording, music production, and podcasting
Included Software:
Fender Studio Pro 6-month TrialSKU: FES-AB-GO
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
AUDIX A10X Studio Quality Earphones for Precise Imaging & Low Distortion
Deity S-Mic 2 Shotgun Microphone
Benro MeVideo Wired Headset
Deity C14 Locking 3.5mm To 5 Pin Lemo Cable
PSC Garfield Headphone Softie Earpad Covers Small Black Pair








