The Hasselblad Battery Charging Hub for X System supports the current 3400mAh batteries. It charges a single battery in two hours and 18 minutes and two cells charge in two hours and 48 minutes. The charging hub is also compatible with first-generation X System 3200mAh batteries that will charge in approximately three hours. When the cells are fully charged, the hub will announce an audible chime. Additionally, the charger supplies power to the batteries from power banks through its USB Type-C connector or via its included power supply. During the charging process, the front LEDs indicate the status and capacity of the batteries.
Hasselblad Battery Charging Hub Set
2-Bay Charger with USB Type-C Connector
LED Indicators Show Status & Capacity
For Current X System 3400mAh Batteries
Charges First Gen X System Batteries
Audible Chime Announces Charge Complete
Includes Power Supply
$270.00
Related products
-
Battery adapters and DC couplers
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage
0 out of 5(0)Dynacore Tiny V-Lock Cage mount.
It can be fixed in any position in the camera cage with 1/4 thread.
It includes Two D-tap outputs for powering of multiple devices.
Weight: 0.1Kg
Size: 112*83*26mm
SKU: DYN-D-MS-CA -
Battery adapters and DC couplers
Dynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
Battery adapters and DC couplersDynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
0 out of 5(0)- Allows Hot Swapping of (2) Tiny V-Mount batteries
- LED Power Indicator for each Battery Position
- Adds 2x D-tap outputs
- Wire-Free internal
- Multiple circuit protection
SKU: DYN-D-TMS -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Power System
0 out of 5(0)- Continually power your camera with USB battery packs
- Hot swap batteries mid-shooting with no downtime
- No need to purchase multiple camera batteries
- Compatible with most camera brands
- Can be adapted to work with D-Tap batteries; use D-Tap to USB Converter
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- A Relay Camera Coupler (sold separately) is required to use Case Relay External Power System.
SKU: TET-30.CRUPS110