-
×
Antari HZ400 Haze Machine DMX
1 × $2,019.00 -
×
Dynacore D-MS-PG Mount Tiny V-Lock for camera rail
1 × $89.00
Subtotal: $2,108.00
Battery adapters and DC couplers
Hasselblad Battery Charging Hub Set
2-Bay Charger with USB Type-C Connector
LED Indicators Show Status & Capacity
For Current X System 3400mAh Batteries
Charges First Gen X System Batteries
Audible Chime Announces Charge Complete
Includes Power Supply
$270.00
The Hasselblad Battery Charging Hub for X System supports the current 3400mAh batteries. It charges a single battery in two hours and 18 minutes and two cells charge in two hours and 48 minutes. The charging hub is also compatible with first-generation X System 3200mAh batteries that will charge in approximately three hours. When the cells are fully charged, the hub will announce an audible chime. Additionally, the charger supplies power to the batteries from power banks through its USB Type-C connector or via its included power supply. During the charging process, the front LEDs indicate the status and capacity of the batteries.
Related products
-
Battery adapters and DC couplers
Dynacore D-SA V-Lock to Gold Mount Adaptor
It may convert the V-plate to the Gold Mount bracket. It offers a solution to allow the use of Gold Mount batteries on V-Mount cameras.
It can also be used as a charger adapter, enabling you to charge Gold Mount batteries on V-lock chargers.
- Lock Gold Mount battery to the Gold Mount side of the D-SA, then the battery converts into V-Mount.
- Lock V-Mount side of D-SA with the camera, then the battery ready to work.
Weight: Approx 0.15Kg
Dimension: 120×84×24.5mmSKU: DYN-D-SA -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Nanlite BT-BA-V Battery adaptor V-Mount
Attach a V-Mount battery to a light stand and power your Forza 60, Pavotube 15C, or 30C.
The Nanlite BT-BA-V can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube of Forza. The DC output is suitable for the Forza 60, Forza 60B, Pavotube 15C, and Pavotube 30C.
SKU: NAN-NNBTBAV
