IDX iMicro-98P 97Wh Li-ion V-Mount battery

The REDVOLT NANO-V battery is a small lightweight power solution for the KOMODO-X, weighing in at only 0.63lbs (288g), ideal for gimbals, drones, and other setups where form factor and weight matter. The batteries dimensions (66 x 88 x 44mm) ensure a completely flat surface on the top and sides of the camera allowing for various combinations of cages and plates to be attached uninterrupted.

Featuring a 49Wh capacity with a maximum output of 6A the battery can power the KOMODO-X and DSMC3 RED Touch 7.0 inch LCD for short durations when wanting to shoot as light weight as possible.

REDVOLT NANO-V was designed in partnership with Core SWX and is compatible with most cameras/modules that accept V-Lock batteries. For issues or troubleshooting, please visit https://coreswx.supportsystem.com.

The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won’t be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.

With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps – you can get a maximum of 15 Amps Output.

The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity.

A 4-level indicator shows you the remaining capacity. There’s a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.

● Internal Charger Battery V-Mount.
● Lightweight, compact, high-performance Lithium-ion battery pack.
● It can be charged by itself without using an external charger. The LED indicator will light on from 1 LED to 5 LEDs during charging, and all off when fully charged.
● The five-step LED power status indicator shows accurately remaining battery capacity.
● Industry-standard Power Tap& USB output(5V, 2A) can fit on-board Camera Light and other accessories. Before using the USB output, long-press the LED check button for 3 seconds to activate it.
● Input Voltage AC90V~240V 50~60Hz, apply to the global power grid.
● Built-in intelligent IC circuit control, protection for over-charge, over-discharge, over-current, outside circuit short and non-equilibrium an unconventional situation.
● Non-memory effect.
● Environment-friendly: No poisonous elements
● Dynacore Batteries are manufactured according to CE, ROHS standard