The IDX Two-Channel 7.4V Simultaneous Charger for select Canon, Panasonic and Sony Batteries charges up to two batteries simultaneously via interchangeable battery plates, sold separately. It supports a wide range of 7.4V Canon, Panasonic, and Sony batteries, and supports 100 to 240V worldwide power input. The different battery brands/types can be charged at the same time.The IDX LC-2A is designed with thermal monitoring and quick-charge safeguard, which ensures that charging will automatically stop when the battery is fully charged in order not to damage the battery. At the same time, LED indicators will communicate charging status, whether “charging” or “complete.” If the charger is to be inactive for one hour, it will power down entirely.
IDX Two-Channel 7.4V Simultaneous Charger for select Canon, Panasonic and Sony Batteries
Simultaneous Dual Battery Charger
Uses Interchangeable Battery Plates
Worldwide 100-240V Power Input
Thermal Monitor & Quick-Charge Safeguard
$315.00
Related products
-
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
0 out of 5(0)D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).Â
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using  a super clamp or convi clamp.
SKU: DYN-D-2BS-24 -
Battery adapters and DC couplers
Dynacore D-MS-CA Mount Tiny V-Lock for camera cage
0 out of 5(0)Dynacore Tiny V-Lock Cage mount.
It can be fixed in any position in the camera cage with 1/4 thread.
It includes Two D-tap outputs for powering of multiple devices.
Weight: 0.1Kg
Size: 112*83*26mm
SKU: DYN-D-MS-CA -
Battery adapters and DC couplers
Dynacore D-C Multi-Voltage Splitter V-Lock for camera rigs
0 out of 5(0)Dynacore D-C Voltage splitter allows for connection of Multiple devices requiring different voltages on a camera rig.Multi-output adapter designed for DSLR cameras and accessories.
Output Voltage: 5V/7.2V/12V/15V(11V to 17V).
Built-in HDMI distributor, one standard signal input and two standard signal output.
V-Mount ENG batteries are required for the power.SKU: DYN-D-C Mount(With out HDMI) -
Battery adapters and DC couplers
Jupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
Battery adapters and DC couplersJupio ProLine V-Mount Adapter plate for 2x Sony NP-F Series Batteries
0 out of 5(0)- V-Mount Adapter plate allows you to use 2 x Sony NP-F series batteries
SKU: JUP-BVM0250 -
Battery adapters and DC couplers
Dynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
Battery adapters and DC couplersDynacore D-TMS Tiny Hot Swap Plate for V-Mount Pocket-Sized Batteries
0 out of 5(0)- Allows Hot Swapping of (2) Tiny V-Mount batteries
- LED Power Indicator for each Battery Position
- Adds 2x D-tap outputs
- Wire-Free internal
- Multiple circuit protection
SKU: DYN-D-TMS
Blackmagic Design Blackmagic Pocket Camera Battery Grip




