-
×
Blackmagic Design Expansion Cable for Micro Studio Camera 4K
1 × $58.00 -
×
Chauvet DJ D-FI XLR-TX - Wireless DMX Transmitter
1 × $109.00
Subtotal: $167.00
Wireless DMX distribution
LumenRadio CRMX Slim RX RDM IP65
Single Universe Flex unit
DMX512-A and RDM support
Up to 1000 meter link range
5 ms latency
Automated Cognitive Coexistence
Forward Error Correction
$1,090.45
CRMX Slim RX RDM is an IP65 rated receiver for one DMX/RDM universe being transmitted by any CRMX transmitter. It supports one full DMX/RDM universe of up to 512 channels at maximum refresh rate. CRMX Slim RX RDM is the smallest available RDM enabled wireless lighting control product rated for true outdoor use. It can easily be mounted inside light poles, or any other place where space is constrained. Together with an RDM compliant CRMX transmitter, the CRMX Slim RX RDM also supports RDM (ANSI E1.20). Use it together with our prized CRMX SuperNova RDM controller and management software to monitor signal strength and make settings from a remote location. Connect it to any RDM enabled fixture to get wireless feedback from the fixture.
Related products
-
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver RatPac Blue
The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0273.001.0A -
-
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Luminous Green
The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0275.001.0A -
Wireless DMX distribution
Chauvet DJ D-FI XLR-RX – Wireless DMX Receiver
The Chauvet DJ D-FI XLR-RX gives you a wireless DMX receiver that allows you to turn any light wireless! Using revolutionary technology, the D-FI XLR Receiver provides instand wireless communication to DMX-compatible lights
SKU: CDJ-DFIXLR-RX
