Allows for mounting of Stardust on a C-stand or similar. Mounting hole fits up to 1/2″ bolts.
Attaches to the Stardust using included M10 and 3/8″ handles. When not used, the handles can be safely stored mounted to the yoke on separate threaded holes. M10 side and 3/8″side are clearly marked.
$239.00
Allows for mounting of Stardust on a C-stand or similar. Mounting hole fits up to 1/2″ bolts.
Attaches to the Stardust using included M10 and 3/8″ handles. When not used, the handles can be safely stored mounted to the yoke on separate threaded holes. M10 side and 3/8″side are clearly marked.
| Brand |
|---|
Prolycht Extended Base is a lightweight bridge that rises the bottom of the Orion 675 FS, without interfering with its yoke. It allows the Orion 675 FS to be set-up on a flat surface while keeping its front-end accessories clear from that surface. It can also be used as a handle or tie-off point for the light head. Once installed, the light can go back and forth from a desk-top to a Junior stand without any change in configuration.
The Super Clamp Adapter attaches to the back of the SkyPanel PSU (no tools required) and allows for the mounting of the PSU to a wide variety of objects including light stand stems and truss.
– Attaches to SkyPanel PSU or Battery Adapter Plates
– Comes with Super Clamp for mounting to a variety of objects
– Tool-less system allows for quick attachment and release from the PSU
Designed for studio use and permanent installations, this Aputure Pole Operated Yoke allows you to mount the Nova P600c LED Panel to a lighting grid. By rotating the knobs affixed to the yoke, the pan and tilt axes of the fixture can be independently adjusted for 360° rotation. Additionally, a pole can be used to operate the pan and tilt axes from a lower height, removing the need to climb up to the lighting grid when the angle of the Nova P600c needs to be adjusted.
LARH Textile High Lite 12' X 20' 
Nikon AF-S Nikkor 200-500 F/5.6e ED VR 
Arri Orbiter P.O. Yoke with Spigot 
