Bracket for V-Mount Batteries
10-Hour Run Time with 190Wh Battery
$221.00
The V-Mount Battery Adapter from LumenRadio attaches to the sides of of the unit using two of the chassis screws. It plugs into the DC power barrel plug using the threaded barrel connector on the rear of the unit. This allows for battery operation of the devices for several hours, depending on battery capacity. A typical battery of 190Wh gives you 10 hours of run time.
NEO 16A Peak with 12A draw
Firmware upgradable battery packs through USB
UN38.3 Certified for air travel safe transportation
New backlit multipurpose LCD
View battery vitals through RFID reader on the battery
Intergrated Smart P-Tap
Rates for 2000 cycles with a 2 year warranty
Rubberised housing to protect against accidental drops
Storage mode built-in
Hibernation mode when not in use after 48 hours
The 26V V-Mount/Gold-Mount battery is suited for equipment inputs ranging from 18 to 30VDC. The internal protection chips makes sure there won’t be any over-heating, over-charge, over-discharge and over- current, causing any risk or harm.
With a normal working current of 10 Amps at 26VDC the battery can provide much power. If your equipment uses more than the 10 Amps – you can get a maximum of 15 Amps Output.
The battery is chargeable and can be used in temperatures ranging from -20°C~ +55°C with a Maximum loss in sub zero temperatures of half the capacity.
A 4-level indicator shows you the remaining capacity. There’s a dedicated 26V charger available with a output of 29.4V at 5 Amps. This charger may not be used for any other equipment as the high voltage can kill electronic circuits that are not suitable.
1. Compact and lightweight to be carried around: designed to lighten the burden of the film industry, the VB series is approximately 30% smaller than traditional V-mount batteries!
2. Intelligent BMS chip for efficient and safe use: a built-in highly integrated BMS chip takes up less space while supporting varied fast-charging protocols and bi-directional 65W (Max) USB-C PD fast charging!
3. Various interfaces for high compatibility: compatible with camera / camcorder / monitor / wireless transmitter / video light, etc.
4. Practical OLED display for precise control: keeps track of the battery’s working status at all times!
5. Premium Li-battery with guaranteed quality and safety: built-in high-capacity premium Li-battery, a double guarantee of quality and performance!
D-200MS is a great size choice many who want to run their camera and or lighting with size and high capacity is considered.
Great small size which uses an innovative double housing structure to help isolate the cells from circuit board. This, along with a newly designed super strong outer shell, offers the best protection for the cells from damage cause by impact.
Features include D-tap and USB output connectors outputs for use in powering a multitude of peripherals.
D-tap output support a maximum of 10A output, which is perfect for a camera, LED light, monitor or wireless transmission system, etc.
USB output offers 5V and 2Amp handling for convenient charging of mobile phones, iPad, etc.
SmallRig LP-E6NH Camera Battery and Charger Kit 3821 
Maha Power supply for MH-C801D and MH-C808M Australian pins 
Dynacore DS-192D(S) Battery V-Lock Separable 14.8V 96+96Wh 
