A handy, cable-free solution for wireless DMX, the W-DMX Stick Wireless DMX Plug-In Receiver from LumenRadio is a plug-and-play accessory that works combined with the optional Orb transmitter. It eliminates the need to run DMX cables from your controller to your fixtures. Simply plug the Stick into the light using its XLR 5-pin connector to achieve reliable W-DMX performance. It fully supports DMX512, as well as RX CRMX and W-DMX protocols. The Stick is not only compatible with the Orb; it can also be combined with other LumenRadio W-DMX and CRMX devices, such as the more advanced Aurora or Stardust. The Stick is particularly helpful if you take your lighting projects on the go.
LumenRadio W-DMX Stick RX
DMX512, W-DMX, and CRMX Compatible
Plug-and-Play Connectivity
5-Pin XLR DMX
Works with Optional Orb Transmitter
Built-In Antenna
2402 to 2480 MHz Frequency Range
Cable-Free Lighting Control
USB-C Power
$510.38
Related products
-
Wireless DMX distribution
Godox TimoLink TRX Wireless DMX Transceiver
0 out of 5(0)Single Unit Transmitter and Receiver
Up to 300m Long-Range Transmission
LumenRadio CRMX Technology
5-Pin Male XLR Connector Rotates 270?
Built-In Signal Indicators
Test Function Checks Connection StatusSKU: GOD-11.TIMOLINKTRX -
Wireless DMX distribution
RatPac Satellite CE CRMX Transmitter Granite Gray
0 out of 5(0)RatPac’s new Satellite is the all-in-one Art-Net to wireless DMX transmitter, with splash resistant enclosure, tactile membrane LED buttons and a rugged micro USB connection. Connect via WIFI or plug directly into any console via RJ45. Connect multiple units and universes with the Constellation tool.
*Results vary with previous generation lamps – always test before using.
SKU: RPC-531.0336.001.0A -
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Pure Orange
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0274.001.0A -
Wireless DMX distribution
Chauvet DJ D-FI XLR-RX – Wireless DMX Receiver
0 out of 5(0)The Chauvet DJ D-FI XLR-RX gives you a wireless DMX receiver that allows you to turn any light wireless! Using revolutionary technology, the D-FI XLR Receiver provides instand wireless communication to DMX-compatible lights
SKU: CDJ-DFIXLR-RX






