A handy, cable-free solution for wireless DMX, the W-DMX Stick Wireless DMX Plug-In Receiver from LumenRadio is a plug-and-play accessory that works combined with the optional Orb transmitter. It eliminates the need to run DMX cables from your controller to your fixtures. Simply plug the Stick into the light using its XLR 5-pin connector to achieve reliable W-DMX performance. It fully supports DMX512, as well as RX CRMX and W-DMX protocols. The Stick is not only compatible with the Orb; it can also be combined with other LumenRadio W-DMX and CRMX devices, such as the more advanced Aurora or Stardust. The Stick is particularly helpful if you take your lighting projects on the go.
LumenRadio W-DMX Stick RX
DMX512, W-DMX, and CRMX Compatible
Plug-and-Play Connectivity
5-Pin XLR DMX
Works with Optional Orb Transmitter
Built-In Antenna
2402 to 2480 MHz Frequency Range
Cable-Free Lighting Control
USB-C Power
$510.38
Related products
-
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Granite Gray
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0276.001.0A -
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Luminous Green
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0275.001.0A -
Wireless DMX distribution
Exalux Connect RX-100s CRMX Receiver
0 out of 5(0)Exalux Connect RX100s is a standalone wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small Exalux PowerBank battery.
RX100s suits with any LED fixture thanks to the flexible connector on cable system.
SKU: EXL-CNT.000.005 -
Wireless DMX distribution
Aputure Sidus One
0 out of 5(0)- Battery-powered single-universe DMX/CRMX transceiver with Sidus Bluetooth. Compatible with CRMX, DMX512, RDM, Art-Net via Wi-Fi, sACN via Wi-Fi, and Sidus Link Bluetooth
- Combine up to 4 Sidus One transceivers to access up to 4 universes of DMX control using Sidus Link Pro
- Wireless range: CRMX: 300m, Sidus BT: 180m, Wi-Fi: 120m
- 18 hours of battery life with USB-C charging
- IP54 dust and water resistant
SKU: APU-APR0316A31
Samyang 85mm F1.4 MK2 Fuji X Full Frame Camera Lens
Canon RF 24mm f/1.8 Macro IS STM lens
Advance AT7 Electrical Tape Flame Retardant Green 19mm x 20m (520/203E equivalent)
Joes Sticky Stuff 12mm x 6.1m Clear Blue Label Tin
RatPac Satellite CE CRMX Transmitter Granite Gray






