A handy, cable-free solution for wireless DMX, the W-DMX Stick Wireless DMX Plug-In Receiver from LumenRadio is a plug-and-play accessory that works combined with the optional Orb transmitter. It eliminates the need to run DMX cables from your controller to your fixtures. Simply plug the Stick into the light using its XLR 5-pin connector to achieve reliable W-DMX performance. It fully supports DMX512, as well as RX CRMX and W-DMX protocols. The Stick is not only compatible with the Orb; it can also be combined with other LumenRadio W-DMX and CRMX devices, such as the more advanced Aurora or Stardust. The Stick is particularly helpful if you take your lighting projects on the go.
LumenRadio W-DMX Stick RX
- DMX512, W-DMX, and CRMX Compatible
- Plug-and-Play Connectivity
- 5-Pin XLR DMX
- Works with Optional Orb Transmitter
- Built-In Antenna
- 2402 to 2480 MHz Frequency Range
- Cable-Free Lighting Control
- USB-C Power
*Does not come with TrueCon Cable
$553.49
Related products
-
Wireless DMX distribution
Chauvet DJ D-FI XLR-TX – Wireless DMX Transmitter
0 out of 5(0)The D-FI XLR-TX gives you a wireless DMX Transmitter that transforms conventionally wired DMX setups into wireless! Battery-powered, the D-FI XLR-TX fits in the palm of your hand while providing instant wireless communication between similar fixtures.
SKU: CDJ-DFIXLR-TX -
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Pure Orange
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0274.001.0A -
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver RatPac Blue
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0273.001.0A -
Wireless DMX distribution
Exalux Connect RX-100s CRMX Receiver
0 out of 5(0)Exalux Connect RX100s is a standalone wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small Exalux PowerBank battery.
RX100s suits with any LED fixture thanks to the flexible connector on cable system.
SKU: EXL-CNT.000.005
RoboCup Black
Chauvet DJ D-FI XLR Pack - Wireless DMX Control






