Manfrotto 131DDB Accessory Arm For 4 Heads
Can be mounted on Supports with max load capacity greater than 6kg and 60mm disc diameter.
$263.12
Related products
-
Arms Grip/Extension, Boom and Tripod Mount
Avenger D500B Arm Extension Grip 20” Black weighs 1030g 51cm long
Arms Grip/Extension, Boom and Tripod MountAvenger D500B Arm Extension Grip 20” Black weighs 1030g 51cm long
0 out of 5(0)The Avenger D500B 20 inch/51 cm grip arm in black, is one of the most popular accessories used on C-Stands and is commonly used with the D200B grip head! Grip arms are used for providing extended grip points from stands. Commonly used in cine and video shoots to hold scrims, flags and floppies these arms provide a number of uses. Photographers use these grip arms for holding lights and clamping reflectors. A must-have tool to have in your kit! Recommended Accessories: Roller Bag AVCSA1301B, A2033FCB, A2030DCB, A2033LCB, D200B, A2014CB, A2007CB, E650, E250, D220, D240.
SKU: AVN-D500B -
Arms Grip/Extension, Boom and Tripod Mount
Avenger D700B Arm Extension max 122cm BLACK secure attach to Light Stands 47-122cm for Holding Reflector
Arms Grip/Extension, Boom and Tripod MountAvenger D700B Arm Extension max 122cm BLACK secure attach to Light Stands 47-122cm for Holding Reflector
0 out of 5(0)The D700B collapsible reflector holder is designed for single banded oval collapsible reflectors and TriGrips. Popular collapsible reflectors in silver, white, a combination of silver/white or black are very popular to use with this holder. The reflector spring clips are optimized to work with reflector bands up to 12 mm/0.47 in wide. The D700B attaches to baby mounts using a 16 mm/ 5/8 in receiver. The D700B is quite commonly used with the Super Clamp™ (C1575B) and an E600 hex snap-in pin, baby light stands and other clamp accessories which allow for easy reflector positioning. The max length of this popular reflector holder is 122 cm/48 in, while the minimum length is 47 cm/18.5 in. Recommended Accessories: C1575B, E600, A2030DCB, A2030D, A0030B, A0035CS, A4041B, A4039CS, D705B.
SKU: AVN-d700b -
Arms Grip/Extension, Boom and Tripod Mount
Manfrotto 085BSL Boom Light Black A25 no Stand
0 out of 5(0)Diameter 35mm. 3 section boom arm complete with Pivoting Clamp 123, Counter Weight 022, cable clips and locking key. Load: 6kg at maximum extension (250cm) with 7kg of counter weight. Weight: 2.2kg, boom only. Dismantled length: 100cm. Assembled: 280cm.
SKU: MAN-085BSL
Stylus 386 Tape Stretch & Seal Tape Red - EOL
Sachtler Carry handle flowtech
Inca Lens Cap 77mm
Think Tank Travel Pouch (Large)
Benro GoCoupler 2 | 0 deg 1/4" & 3/8" Mount
RoboCup Gray
Manfrotto 036-14 Stud Lighting 1/4'' Hex Stud For Superclamp 5.4cm 036-38 for 3/8'' version
Manfrotto 036MR Stud Lighting Hexagon w hole for safty cable for lights also for joining 2 superclamps
Benro GoPlatform Laptop/Projector Platform
Tenba Transport Case LED-60W (for ARRI S60)
Shure A58WS-BLK Foam Windscreen for SM58 / Beta58 (Black)
Inca Lens Cap 52mm
Nanlite Parabolic Softbox Grid 90cm
Benro GoRail 2 | 50cm Long
Setwear Glove Hot Hand Large Black
Avenger A0010 Stand Lighting Baby 10 47-100cm 15kg Payload Chrome Steel & Alum w2.5kg
Rosco E-Colour Gel Sheet 442 1/2 CT Straw (CTS) 1.2m x 53cm
Benro GoKnob 1
Extension Lead Piggyback 15A Cable 10A Plug and Socket Black with heat shrink 25m
Manfrotto 248 Screw Metz Flash 1/4"use with 030ARCH-14 plate
Pelican 1020 Micro Case Black With Black
SmallRig "Rhinoceros" Advanced Cage Kit for Sony Alpha 7R V / Alpha 7 IV / Alpha 7S III 3710
Okko Pro / CPL Circular Polarizer Filter 77mm
Setwear Glove Leather Fingerless Small Black
Benro Tortoise Short Centre Column #2
Benro Universal Camera L-Bracket
Benro GoCoupler 1 | 90 deg
Ercole DK-100 Menace Arm Kit




