The Miller Combo Pedestal for 100mm fluid heads s a compact, portable pedestal system for 100mm ball fluid heads. The pedestal features a load capacity of 30kgs, a 35cm stroke, and an adjustable air column system with a height range of 90 to 125cm. The large 12cm wheels move smoothly and are fitted with individual brakes. This sturdy system features a quick column lock, an 29cm steering wheel, and adjustable cable guards. The Combo Pedestal System is simple and easy to set up, and it incorporates a carry handle on its dolly.
Miller Combo Pedestal for 100mm fluid heads
Compact and portable with carry handle for dolly.
Wide height range 900mm (35.4?) up to 1250mm (49.2?).
Simple and easy to set up and use.
Air adjustable column system for quick payload balancing.
Quick action column lock.
Smooth 350 mm (13.8?) stroke.
Independent 125 mm (4.9?) dolly wheel brake system.
Sturdy adjustable cable guards.
Steering wheel diameter 294 mm (11.6?).
Dolly tracking width 920 mm (36.2?).
A portable hand pump is not included.
$5,746.00
Related products
-
100mm+ Legs
Miller Baby Legs 2-Stage Alloy Tripod W/ Soft Case And Ground Spreader
0 out of 5(0)Built for maximum torsional strength, high versatility and compact storage, the 455,100mm, 2 stage baby Toggle tripod is the perfect partner for 402 series tripods where low shots are required. Constructed from lightweight alloy and employing single twist positive leg locks, the 455 2-stage Toggle tripod is quick to set up and pack away after the shoot.
Employing flexible, adjustable spreader arms the ground spreader, with pullover rubber stirrups, is very reliable tool of trade, requires minimal maintenance and can be used on even and semi even ground.SKU: MIL-455$1,355.00 -
100mm+ Legs
Miller Sprinter II 2-Stage Alloy Tripod Legs (Mid-Level Spreader Ready)
0 out of 5(0)The 1580 Sprinter II 2-stage, alloy, above ground spreader tripod employs the patented Miller design that enables the leg stages to be adjusted independently via two leg locks conveniently located high above the ground thus eliminating the need for the operator to bend down.
The Sprinter II dual action leg lock system is designed for operators who require speed and convenience of setup without compromise. By placing independent leg lock levers adjacent to each other, both the upper and lower stages they can be operated in unison or independently from one single upper leg location.
The black anodised leg assemblies are integrated with the precision-machined 100mm die-cast alloy bowl resulting in a highly rigid tripod no matter what height you choose.Feet and spreader sold separately
SKU: MIL-1580$1,581.00 -
100mm+ Legs
Sachtler Tripod Cine 2000 short
0 out of 5(0)Whatever surface you are working on, you need to be sure that you are stable and safe at all times. The Sachtler Cine 2000 S Heavy-Duty Aluminum Tripod is built to help you work in complete confidence at a height range of 17 – 43 cm. The aluminum design and large spikes gives you a solid foundation to work on in any environment, so that you can focus on getting the best shot possible.
Once you have found the perfect shooting position, fast-action clamps and scales allow you to level in a matter of seconds. The 150 mm bowl base means that you can use the majority of popular cine/EFP fluid heads so that you can work in the way that brings out your best. The hinge lock adjustment helps to prevent any unwanted friction between the tripod bowl and legs, meaning that all your gear continues to operate at its highest level for longer.
SKU: SAC-6232$4,363.00 -
100mm+ Legs
Manfrotto MVTTWINFC 645 Fast Twin leg carbon tripod
0 out of 5(0)The 645 FTT Fast Twin Carbon Tripod features a double tubing and FAST Lever Lock technology for the most robust support ever. The tripod is provided with a 2 in 1 bowl: a standard 100mm bowl along with a 75mm adapter to enable the use of a wider range of video heads. It also features a middle spreader lock. However, the 3-angle selectors make the use of a spreader a matter of optional preference.
This range was developed with the primary objective of making video shooting easier by reducing set up times and maintenance. The synchronized closure mechanisms between the upper and lower locks, enable videographers to control the entire leg with a single lock and get to work in record time. The new tripod provides maximum versatility, supporting the use of a broad choice of heads, and ensuring the utmost rigidity while also being extremely lightweight.
Moreover, the 645 FTT Fast Twin Carbon Tripod is compatible with the 2 in 1 ground and middle telescopic spreader/ (which is sold as an optional accessory) and it features a 3-angle selection mechanism for easy set up. It is equipped with spiked feet with rubber overshoes for a firm grip and adaptability to the most diverse shooting locations.SKU: MAN-MVTTWINFC$1,822.00 -
100mm+ Legs
Benro Aluminium 100mm Video Hi-Hat 2
0 out of 5(0)The Benro 100mm Hi-Hat is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminium leg/magnesium bowl hi-hat can be placed low to the ground, on stairs or even secured to a wooden board.
The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areas. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. In addition, each leg features oversized rubber twist locks and is telescoping for adjusting the height. When you combine these two features, you can easily set up the hi-hat for use on uneven terrain and even stairs.
The 100mm version will accept a 100mm video head and includes a 3/8″-16 low profile tie down adapter for getting low to the ground shots. You can add a 100mm half-ball adapter (BL100) to mount any standard 3/8″-16 flat base video head or photo head. The large rubber feet are attached to a metal ball joint for quick positioning, which can be removed for attaching the included metal spiked feet. The feet also have pre-drilled holes for securing to wooden octagon boards when using on top of apple boxes or securing the board to the top of a ladder. There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arms. Each 3/8″-16 male to ¼”-20 female insert can be used to convert any standard ¼”-20 screw to 3/8″-16 in addition to being removed for attaching 3/8″-16 accessories.Transporting the hi-hat is easy with the included carrying case.
SKU: BEN-HH100AV$431.00$457.00