The 467 Hi-Hat can be used to achieve ultra-low shot angles. The 467 Hi-Hat is suited to all 150mm ball levelling fluid heads and can be bolted permanently to any flat surface.
$808.00
| Maximum Payload Capacity | 40kg (88lbs) |
| Weight | 2.2kg (4.8lbs) |
| Transport Length | 151mm (5.9″) |
| Mounting Base | 150mm (5.9″) ball levelling |
| Leg Material | Alloy |
| Footprint Diameter | 320mm (12.6″) |
The Benro 100mm Hi-Hat is a versatile video production tool that allows for unique camera placement and comes in a portable package. This aluminium leg/magnesium bowl hi-hat can be placed low to the ground, on stairs or even secured to a wooden board.
The small footprint allows the hi-hat to be used in tight spaces and on smaller surface areas. Each leg can be independently positioned at one of the three locks located on the outside of the bowl. In addition, each leg features oversized rubber twist locks and is telescoping for adjusting the height. When you combine these two features, you can easily set up the hi-hat for use on uneven terrain and even stairs.
The 100mm version will accept a 100mm video head and includes a 3/8″-16 low profile tie down adapter for getting low to the ground shots. You can add a 100mm half-ball adapter (BL100) to mount any standard 3/8″-16 flat base video head or photo head. The large rubber feet are attached to a metal ball joint for quick positioning, which can be removed for attaching the included metal spiked feet. The feet also have pre-drilled holes for securing to wooden octagon boards when using on top of apple boxes or securing the board to the top of a ladder. There are three accessory mounts on the outside of the bowl come in handy for attaching monitor arms. Each 3/8″-16 male to ¼”-20 female insert can be used to convert any standard ¼”-20 screw to 3/8″-16 in addition to being removed for attaching 3/8″-16 accessories.Transporting the hi-hat is easy with the included carrying case.
Compact and portable with carry handle for dolly.
Wide height range 900mm (35.4?) up to 1250mm (49.2?).
Simple and easy to set up and use.
Air adjustable column system for quick payload balancing.
Quick action column lock.
Smooth 350 mm (13.8?) stroke.
Independent 125 mm (4.9?) dolly wheel brake system.
Sturdy adjustable cable guards.
Steering wheel diameter 294 mm (11.6?).
Dolly tracking width 920 mm (36.2?).
A portable hand pump is not included.
Compact and portable with carry handle for column & dolly.
Wide height range 810mm (31.8?) up to 1690mm (66.5?) with extension (opt.).
Precise, smooth and low noise in-shot column with 450mm (17.7?) stroke.
Simple and easy to setup and use with drag control knob pressure column and lock lever pressure column.
Air adjustable column system for quick payload balancing.
Independent dolly wheel axle brake system eliminates wheel tyre indents.
Multiple wheel positions for linear or radius dolly tracking.
125mm (4.9?) dual ball bearing wheels for quick swivel-turn action.
Centre hub locking column with adjustable spider arm supports.
Steering wheel diameter 294mm (11.6?).
Dolly tracking width 970mm (38.2?).
Sturdy adjustable cable guards.
Portable hand pump with pressure gauge.
The 528XB is the ideal location tripod, with a massive 110 lbs (50kg) load capacity. It is a sturdy single-stage tripod with a single-tube leg structure. Tubes are made of stainless steel for strength under heavy loads, and aluminum for weight saving. The leg spread is fully adjustable, but also incorporates a 30° locked position for faster set up and greater strength. A 100mm bowl accepts industry-standard half-ball video heads and allows you to level the head quickly for accurate panoramic shots. The included claw ball allows you to use it with heads not equipped with a half ball. The 528XB includes a versatile mid-level spreader, which has telescopic ”ratchet” braces that click into place in each of the preset positions for faster deployment. Each brace can be individually set, allowing each tripod leg to be separately positioned.
The 1589 Sprinter II 1-stage, alloy, above ground spreader tripod employs the patented Miller design that enables leg adjustment via a leg lock conveniently located high above the ground thus eliminating the need for the operator to bend down.
The Sprinter II dual action leg lock system is designed for operators who require speed and convenience of setup without compromise. By placing independent leg lock levers adjacent to each other, both the upper and lower stages they can be operated in unison or independently from one single upper leg location.
The black anodised leg assemblies are integrated with the precision-machined 100mm die-cast alloy bowl resulting in a highly rigid tripod no matter what height you choose.
Feet and spreader sold separately
TecArt DMX Cable Black 5 pin XLR 1m 
Rosco Foamcoat 7100 13L 
Miller Hi Hat 100mm 
