Manfrotto 244RC Arm Variable Friction with 200PL adaptor 3kg Payload 53cm Length Subtotal: $293.48
Arms Articulated/Magic/Friction and Flexible
Proaim Scaffold Pole with Mitchell Mount for Vibration Isolator Arms & 3-axis Camera Gimbals
Special Order Item – Please call to order.
For Vibration Isolator Arms
For 3-Axis Camera Gimbals
Pole Removes from Mitchell Mount
Spring-Loaded Locking Lever
Supports up to 1100 Pounds
Storage Bag Included
The Proaim Scaffold Pole with Mitchell Mount enables expanding the height and range of operation of your Proaim Airwave Vibration Isolator Arm (not included), as well as motorized gimbal and stabilizers such as the DJI Ronin and FREEFLY M/VI. The Scaffold Pole consists of a Mitchell mounting fitting and a 3′ long piece of mounting pipe. The Mitchell fitting allows you to mount this setup on any rig with a Mitchell Plate. The pole slides into a socket on top of the Mitchell fitting, and it is secured via a spring-loaded locking lever. It features a maximum load capacity of over 1100 pounds; do not exceed the load capacity of your mounting gear.
Related products
-
Arms Articulated/Magic/Friction and Flexible
Manfrotto 143RC Arm Magic
Your extra arm in the studio. One lever locks three pivot points. Supplied with a quick release camera plate with secondary safety lock based on the 200PL-14 system. Ideal for mounting a camera or a camcorder exactly at the angle you need it. Fits any 5/8” female sockets, works especially well with 035 Super Clamp.
SKU: MAN-143RC -
Arms Articulated/Magic/Friction and Flexible
Avenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female
Arms Articulated/Magic/Friction and FlexibleAvenger D244N Arm Variable Friction T-Handle 3Kg Payload 53cm Long 2x 5/8 stud 3/8 & 1/4 Female
The Avenger D244N Variable Friction Arm with large locking T-Knob is one of the most popular arms made by Avenger! Often called a Magic Arm™ the D244N is used for lights, camera and audio applications and is the industry standard for most remote rigging applications. The D244N Variable Friction Arm uses a central friction locking handle to lock all 3 points of the arm in place. The length of the arm is 53 cm/20.87 inch and is capable of holding loads up to 3 kg/6.6 lb. Typically the D244N arm is mounted on to a Super Clamp™ or a gravity cast Super Clamp™ but you can also mount it to light stands and other accessories such as wall plates by using the baby 16 mm/ 5/8 inch pin on either end of the arm. The baby pins on each end of the arms also have a 9.53 mm/ 3/8 inch thread receiver or a 6.35 mm/ 1/4 inch threaded receiver. The remote mounting possibilities of this versatile tool are endless! Recommended Accessories: C1575B, C1550, 125, 147, C155, FF3276, 014-14, 014-38, F301, F831TH.
SKU: AVN-D244N
