Radius Nimbus Windshield for Shotgun Microphones (Dark Gray, 3.9″ Length by 0.8″ Diameter)

Related products

• Microphone Accessories

  Shure A7WS Foam Windscreen for SM7, SM7A & SM7B (Black)

  

  Microphone Accessories

  Shure A7WS Foam Windscreen for SM7, SM7A & SM7B (Black)

  0 out of 5

  (0)

  Shure A7WS
  The Shure A7WS is a large foam windscreen designed for use with the SM7 / SM7A / SM7B microphones. Perfect for reducing unwanted breath and wind noise.

  SKU: SHR-A7WS

  $59.00

  Add to cart
• Microphone Accessories

  Shure A58WS-BLK Foam Windscreen for SM58 / Beta58 (Black)

  

  Microphone Accessories

  Shure A58WS-BLK Foam Windscreen for SM58 / Beta58 (Black)

  0 out of 5

  (0)

  The Shure A58WS-BLK is a high quality foam windshield designed for the Shure SM58 / PG48 / PG58 / Beta58 / and other similar shaped microphones. Perfect for helping to reduce wind and breath noise from entering the microphone.

  SKU: SHR-A58WS-BLK

  $15.00

  Add to cart
• Microphone Accessories

  Rycote Triangular Black Mic Flag

  

  Microphone Accessories

  Rycote Triangular Black Mic Flag

  0 out of 5

  (0)

  Triangular Black Mic Flag

  Product Code: 107302

  A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.

  Main Benefits:

  • Fits A Wide Range Of Microphones
  • Lightweight But Tough

  Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

  Customising your mic flag in Australia & New Zealand

  We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.

  Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.

  Fits A Wide Range Of Microphones

  With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

  Lightweight But Tough

  Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

  MIC FLAG BROCHURE – CLICK HERE

  Compatibility – https://www.mymic.rycote.com/products/triangular-black-mic-flag/#compatibility

  MyMic – https://www.mymic.rycote.com/products/triangular-black-mic-flag/

   

  SKU: RYC-RY107302

  $35.00

  Add to cart
• Microphone Accessories

  Rycote Single Square White Mic Flag

  

  Microphone Accessories

  Rycote Single Square White Mic Flag

  0 out of 5

  (0)

  Square White Mic Flag

  Product Code: 107307

  A four-sided, white, square, mic flag, suitable for microphones with 19 to 38 mm diameters.

  Main Benefits:

  • Fits A Wide Range Of Microphones
  • Lightweight But Tough

  Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

  Customising your mic flag in Australia & New Zealand

  We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each square flag requires a minimum of four stickers, opposed to the triangular flags that require three stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.

  Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.

  Fits A Wide Range Of Microphones

  With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

  Lightweight But Tough

  Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.

  MIC FLAG BROCHURE – CLICK HERE

  Compatibility – https://www.mymic.rycote.com/products/square-white-mic-flag/#compatibility

  MyMic – https://www.mymic.rycote.com/products/square-white-mic-flag/

   

  SKU: RYC-RY107307

  $37.00

  Add to cart
• Microphone Accessories

  Shure RK143G SM58 Replacement Grille

  

  Microphone Accessories

  Shure RK143G SM58 Replacement Grille

  0 out of 5

  (0)

  The RK143G is a Shure Microphone replacement grille to suit the legendary SM58 dynamic microphone.

  SKU: SHR-RK143G

  $24.00

  Add to cart