Provide power and video to your RED Touch 7″ monitor from your camera with the RED DIGITAL CINEMA DSMC3 RMI Cable. Its 1m length allows you more mounting opportunities than using the 10″ cable that comes with the RED Touch LCD. This proprietary RMI (RED Monitor Interface) cable is only for RED DSMC3 products. Please note that although the cable bears a resemblance to a standard USB-C cable, it isn’t one, and RED warns against using a USB-C cable in its place, as damage can occur to your camera and/or touchscreen.
RED DSMC3 RMI Cable 1m
- For Connecting DSMC3 RED Touch LCD
- Uses RED Monitor Interface Connectors
$185.00
Related products
-
Adaptors and brand-specific cables and connectors
Blackmagic Design Cable (BMD) Din 1.0/2.3 to Din 1.0/2.3 200mm
Adaptors and brand-specific cables and connectorsBlackmagic Design Cable (BMD) Din 1.0/2.3 to Din 1.0/2.3 200mm
0 out of 5(0)High quality 200mm 6G-SDI cable to connect the mini BNC Din 1.0/2.3 connections on the Blackmagic Video Assist to Din 1.0/2.3 connections.
SKU: BLA-CABLE-DIN/DIN -
Adaptors and brand-specific cables and connectors
Nanlite Header Cable 5m for Forza
0 out of 5(0)Position your power pack further from your Forza head with this longer 5m cable.
This longer 5m cable gives you more flexibility for positioning a Forza LED light on a boom, or a light stand taller than 2.5m. This CB-FZ5 cable is 5m long, whereas the cable included with the Forza 300 and 500 is 2.5m.
SKU: NAN-NNCBFZ5 -
Adaptors and brand-specific cables and connectors
Nanlite CB-DMX-ACP-1/2 DMX Cable for PavoTube II X
0 out of 5(0)The Nanlite CB-DMXACP-1/2 cable is designed to control the Pavotube II X range of RGB LED tubes via DMX.
Featuring a 5 pin locking connector and 2 standard XLR 5 pin terminals both male and female.SKU: NAN-NNCBDMXACP12 -
Adaptors and brand-specific cables and connectors
Nanlite USB-C to DMX Cable for Pavotube T8 7X and Pavobulb
Adaptors and brand-specific cables and connectorsNanlite USB-C to DMX Cable for Pavotube T8 7X and Pavobulb
0 out of 5(0)The Nanlite CB-DMX-USBC-1/3 control cable adds DMX/RDM Control to the Pavotube T8-7X and the Pavobulb.
When using the DMX/RDM control cable you can create more sophisticated animation effects. The cable has a Type-C connector at one end, and three DMX connectors to simultaneously connect to 3 x Pavotube T8 7X.SKU: NAN-NNCBDMXUSBC13