Rycote Blue Lavalier Windjammer – Single

40/55 Reporter Mic Foam

Product Code: 104405

Suitable for reporter mics of 40 mm diameter, with slots no further than 55 mm from the front of the mic.

Main Benefits:

• Up to 10 dB wind and pop noise attenuation with minimal high-frequency loss from this discreet, slip-on windshield
• Excellent resistance to moisture and UV light from the durable, high quality open-cell acoustic foam

The Reporter Mic Foam is a discreet, slip-on foam windshield, designed to protect the microphone head against light wind and pop noise. Made of durable, high quality open-cell acoustic foam, these windshields offer up to 20 dB wind noise attenuation, whilst keeping high frequency loss to a minimum.

Engineered exclusively for Rycote, this high quality foam also provides excellent resistance against the damaging effects of moisture and UV light.

Additionally, you can now also benefit from a further 12 dB wind noise attenuation with Rycote’s Foam Windjammer, specifically designed to accommodate our range of Mic Foam windshields.

Overcovers Advanced White (Pack)

Product Code: 066308

Contents: 25 x Stickies, 23mm Round. 5 x Fur Discs, 26mm Round

Overcovers utilise Rycote exclusive fur technology, providing excellent wind-noise protection for lavalier microphones. They consist of a discreet, fur covering and are supplied with Stickies. With a Stickie affixed to clothing or skin, a fur disc is affixed over the top of a lavalier microphone.

Key features

• Large size (26mm) ideal for DPA Concealers
• Supplied with Stickies Adv Round, at 23mm also bigger than ‘Originals’

Triangular Black Mic Flag

Product Code: 107302

A three-sided, black, triangular mic flag, suitable for microphone with 19 to 38 mm diameters.

Main Benefits:

• Fits A Wide Range Of Microphones
• Lightweight But Tough

Rycote’s Mic Flags are made from durable shatterproof moulded plastic and avoid the use of perishable foam inserts to make the flags fit the microphone. Instead, an array of internally fitted hard-wearing red and black rubber ‘vanes’ secures the flag around the microphone, allowing Rycote’s Mic Flags to be used with any microphones ranging from 19 to 38mm in diameter.

Customising your mic flag in Australia & New Zealand

We suggest that you have your custom designs & logos printed on high-quality, hard-wearing, UV-resistant vinyl stickers, this helps to reduce glare and to be fixed directly onto the flag. Each triangular flag requires a minimum of three stickers, opposed to the square flags that require four stickers per flag. It’s also a good idea to get a few additional stickers printed at the same time.

Typically, we suggest for a quick and effective method of printing, you contact your printing company directly with the details above, that said if the stickers are required urgently most (just-in-time) franchised printing companies across Australia can assist with quick printing solutions. As always, please feel free to reach out if you have any further questions.

Fits A Wide Range Of Microphones

With all of the black and red ‘vanes’ fitted, the Rycote mic flag will securely hold microphones from 19 to 32mm wide. To fit the flags to mics of up to 38mm in diameter, users simply remove the lid of the mic flag and slide out the black vanes, creating a looser fit which allows the broader mics to slide onto the flag.

Lightweight But Tough

Lightweight and extremely hard-wearing, Rycote’s Mic Flags provide a large printable area for sponsors’ logos. Three- and four-sided flags are available, in either black or white; the square type offers a printable logo area 57mm wide by 48mm high on each of its four sides, while the printable area of the three sides on the triangular flag measure 89.5mm wide by 48mm.