TecArt Splitter Rack Mount DMX 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
Related products
-
Data and DMX distribution
Chauvet DJ DMX-RT4 DMX Recorder
0 out of 5(0)- DMX recording and playback device with 4 independent triggers
- Each trigger can be programmed and triggered separately
- Copy, backup and transfer show files using the USB-C connector
- Standard headphone connector (3.5mm) connects to external audio systems for amplified playback
- Password protection ensures shows will not be altered
- Normally Open (N/O) or Normally Closed (N/C) triggers allow the use of most common sensors
- Supplies DC voltage through terminal block to power specific triggers
SKU: CDJ-DMX-RT4 -
Data and DMX distribution
TecArt Main/Backup Switcher Rack Mount DMX 8 in 4 out
0 out of 5(0)The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX streams as soon as the main inputs are disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The unit is available with up to 4 main DMX streams and 4 backup DMX streams. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
Chauvet DJ DataStream8 8-Channel DMX Splitter
0 out of 5(0)Chauvet DJ DataStream8
The Chauvet DJ Data Stream 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals from dual inputs into 8 separate outputs via a master 3-position switch. Each input can be used simultaneously and sent to any output. Individual 2-position switches can also send data from either the A or B input separately. Each of the outputs is optically isolated from the others providing protection in the event of a short. A threaded insert allows the unit to be safely secured to trussing.SKU: CDJ-DATASTREAM8 -
Data and DMX distribution
TecArt USB to DMX Controller
0 out of 5(0)The USB to DMX Controller allows the delivery of a DMX512 signal using third party computer-based lighting control software. It can also be used as an RDM addressing tool. The unit features a mini-USB connection and DMX input and output connectors via 5-pin male/female XLRs.
SKU: n/a -
Data and DMX distribution
TecArt Splitter Desktop RDM 4 way
0 out of 5(0)The TecArt range of data splitters are available as desktop units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DT can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• 2 Main indication LEDs.SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: Desktop.
• DMX signal input: XLR.
• DMX signal output: XLR.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.SKU: n/a