TecArt Splitter Rack Mount RDM 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
Related products
-
Data and DMX distribution
Chauvet DJ DataStream8 8-Channel DMX Splitter
0 out of 5(0)Chauvet DJ DataStream8
The Chauvet DJ Data Stream 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals from dual inputs into 8 separate outputs via a master 3-position switch. Each input can be used simultaneously and sent to any output. Individual 2-position switches can also send data from either the A or B input separately. Each of the outputs is optically isolated from the others providing protection in the event of a short. A threaded insert allows the unit to be safely secured to trussing.SKU: CDJ-DATASTREAM8 -
Data and DMX distribution
Chauvet DJ XPRESS-RACK1024 Rackmount DMX Interface
0 out of 5(0)The Chauvet DJ XPRESS-RACK1024 is a rackmount DMX interface for ShowXpress software. Capable of controlling 2 DMX universes while also unlocking an additional ArtNet universe; giving you 3 universes total. As a result, you can easily store and playback up to 16 shows without a computer; using either the onboard buttons or by the included remote.
SKU: CDJ-XPRESS-RACK1024 -
Data and DMX distribution
TecArt Manual Switcher Rack Mount DMX 8 in 4 out
0 out of 5(0)The TecArt Manual Switcher is used to switch between two lighting desks, with up to 4 DMX universes for each desk. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
The units are available with a choice of 3 or 5 pin connectors, and are also available in 1, 2 or 3 inputs/outputs.
SKU: n/a -
Data and DMX distribution
Chauvet DJ DMX-RT4 DMX Recorder
0 out of 5(0)- DMX recording and playback device with 4 independent triggers
- Each trigger can be programmed and triggered separately
- Copy, backup and transfer show files using the USB-C connector
- Standard headphone connector (3.5mm) connects to external audio systems for amplified playback
- Password protection ensures shows will not be altered
- Normally Open (N/O) or Normally Closed (N/C) triggers allow the use of most common sensors
- Supplies DC voltage through terminal block to power specific triggers
SKU: CDJ-DMX-RT4