The Tentacle Sync E mkII Timecode Generator single set pairs the lightweight, super-compact Sync E mk2 timecode generator with a downloadable Tentacle Sync Studio software license (macOS). This update to the Tentacle Sync E features Bluetooth 5.0 setup and battery management improvements.
Tentacle SYNC E mk2 – Single Set
Single Timecode Generator Unit
iOS/Android App Bluetooth 5.0 Control
Alll SMPTE-12: 23.98, 24 & 25 (50) fps
29.97, 29.97DF & 30 (60) fps
3.5mm Mic Port (TC In/Out) & USB-C Port
High-Precision TCXO, <1 Frame/Day Drift
1 x Sync Software License (macOS)
Locking 3.5mm Tentacle Cable Clamp
Master Clock & Jam-Sync Modes
Up to 50-Hour Runtime, Fast Charging
$387.00
Related products
-
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
0 out of 5(0)PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio, Video Microphones
Deity S-Mic 2 Shotgun Microphone
0 out of 5(0)- Low Off-Axis Coloration
- Supercardioid Pattern
- All Brass Body, Black Speckle Finish
- Low Self-Noise
- Water Resistant and Humidity Proof
- 50Hz to 20kHz Frequency Response
- Includes Foam Windscreen
- Microphone Stand Clip
- Waterproof Hardcase with Cut-Foam Insert
SKU: DEI-09.S-MIC2 -
Audio
Apogee Boom 2×2 USB-C Audio Interface
0 out of 5(0)Whether you’re a musician, podcaster, or live streamer, Apogee BOOM will inspire you to take your projects to the next level. Perfect for beginners and pros, BOOM features legendary Apogee sound quality and onboard DSP for tone-shaping your recordings, all at the most affordable price ever for an Apogee 2×2 USB audio interface.
Best-in-class Apogee conversion and mic preamp technology
Bus powered
Up to 24 bit / 192kHz recording
Low profile design with aluminum body
On-board hardware DSP for low-latency recording with Apogee FX
1x ¼” Instrument input
1x Combi mic/line/instrument input
2x ¼” Balanced outputs
1/4” Headphone outputSKU: APO-BOOM -
Audio
PSC Garfield Headphone Softie Earpad Covers Black Pair
0 out of 5(0)This innovative headphone accessory is designed to provide all day comfort for the working audio professional. Made from soft Rayon Chenille fabric these Headphone Softies easily slip over existing headphone earpieces and provide a new found comfort level. In winter they help eliminate the problem of cold earpieces and in summer the fabric wicks away perspiration for all day comfort. Anyone who wears headphones for hours on end will truly appreciate this product.
SKU: PSC-SGARHS1 -
Audio
Fender AudioBox GO
0 out of 5(0)Fender AudioBox Go
The Fender AudioBox Go is a portable, high-performance 2 x 2 USB-C audio interface designed for creators who need professional-quality recording anywhere. Its XLR mic/line combo input with switchable +48V phantom power handles vocal and instrument recording with clarity, while the dedicated TS instrument input delivers plug-and-play tone for guitars, basses, and line-level sources.
Bus-powered and ultra-portable, the AudioBox Go integrates seamlessly into home studios, desktop setups, or mobile rigs. Compatible with Fender Studio, Fender Studio Pro, and most other audio apps, it’s ready for recording, mixing, and producing music or podcasts right out of the box.
Professional 24-bit / 96 kHz converters and low-noise preamps ensure every recording is crisp and detailed. The ¼-inch stereo headphone output and balanced TRS main outputs give you flexible monitoring options, while the Mix control lets you dial in low-latency, real-time tracking for precise performance.
- 2 x 2, 24-bit / 96 kHz USB-C audio interface
- XLR mic/line combo input with switchable +48V phantom power
- Dedicated TS instrument input for guitar or bass
- ¼-inch stereo headphone output for clear, detailed monitoring
- Two balanced ¼-inch TRS main outputs for studio monitors or powered speakers
- Studio-grade 24-bit / 96 kHz converters for clear, detailed audio
- Bus-powered, portable design for home or mobile setups
- Compatible with Fender Studio, Fender Studio Pro, and most other audio apps
- Ideal for home studios, mobile recording, music production, and podcasting
Included Software:
Fender Studio Pro 6-month TrialSKU: FES-AB-GO
PB Swiss Tools Angular Scriber 220mm
PB Swiss Tools E6 990 Precisionbit Shape E 6.3 (1/4") 30 pc Set in Bitbox
Avenger C1005 Clip Scissor w/Cable Support for Drop Ceilings
Shure ULXD4D Dual-Channel Digital Wireless Receiver (H51: 534 to 598 MHz)
Apogee Boom 2x2 USB-C Audio Interface
Tentacle Sync E Timecode Generator - Standard Set of 2
Kondor Blue 35.5cm Mini XLR Male to 3.5mm Mono Mini Plug Audio Cable for RODE on Camera Mic Systems and Shotguns









