The Armor Man 3.0 Nucleus-M Support Cups allow for an easy solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when using the Nucleus-M’s hand grips with your gimbal system. When you want to attach the Armor Man to the gimbal, simply fit the gimbal-mounted Nucleus-M hand grips into the support cups and then re-grab the hand grips like normal to start operating. When you want to stop operating, simply dock the gimbal, grab onto the support cups and detach them from the hand grips.
$329.00
5′ long polyester seat belt webbing Cinesaddle Fasty Straps are designed to work with the Cinesaddle Stirrups or Anchors to secure your Cinesaddle to a moving or stationary platform. The Fasty Straps feature a buckle that allows you to secure the strap from loosening once you have cinched it tight.
You loop the Fasty strap around a Stirrup (not included) and put it under tension. Or when working with a Cinesaddle Anchor (not included), you can thread the end of the Anchor through the Fasty Strap’s buckle to hold it fast.
Gimboom accessory connector is specifically designed for the revolutionary Gimboom, the fast boom by Manfrotto, allowing the addition of external accessories such as monitors or audio equipment to Gimboom.
It allows users to keep their focus on framing even when the Gimboom is fully extended and the camera display is too far away for the user to see the display. It offers a safe, solid and effortless attachment for any 3/8” threaded accessory, with an anti-rotation geometry to make it perfect for the 244 microarm.
Thanks to the dedicated knob, the one-hand attachment is easy to use even when the gimbal is mounted.
If you have a ring-based gimbal, the Overhead Configuration Gimbal Ring Adapter Clamps allow for an easy quick release solution to attach and detach your gimbal to the Armor Man 3.0’s mechanical arms when in the overhead operating mode. The clamps attach to the left and right sides of the top of the gimbal ring and then after the Overhead Configuration Cable Pulleys are attached to each of the Armor Man’s arms, the operator can simply use the carabiners of the extendable bungee cables to attach to the gimbal to then start operating. When you want to detach the gimbal, simply release the carabiners off of the clamps.
Steadybag is a high-tech update of the old-fashioned beanbag. Steadybag virtually eliminates camera shake without the need for time-consuming tripod setup. Use it for rock-solid shooting on car hoods, fenceposts, window ledges, rocks or branches.
Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :
1- Fix the lens gear to the camera’s focus ring position
2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.
3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.
4- Insert the data cable into the USB port of the fixed plate and the installation is complete.
Jupio Sony NP-FZ100 7.2V 2040mAh Battery 
Manfrotto Lastolite Xpobalance Gry Wht Blk 38cm Double Sided collapsible Grey White Black Card 
Tilta Armor man 3.0 Support Vest Dock 
