Tilta Armor man 3.0 Overhead Configuration Cable Pulley
This pulley attachment slides onto the Armorman 3.0’s mechanical arms when using the overhead configuration. It allows you to attach an extendable bungee cable to each arm so that you can grab onto and provide support for your gimbal from over the top of your camera setup.
$149.00
Related products
-
Stabilisers
Manfrotto MVGFF Follow Focus for Manfrotto Gimbals 220&460
Manfrotto Follow Focus for Gimbal is the perfect accessory for Manfrotto Gimbals, MVG220 and MVG460. It allows you to precisely control focus using the multi-function knob, making shooting easier and more accurate.
Based on a brushless motor and high-precision intelligent chip, this follow focus for gimbal controls the motor rotation and gives you real-time tracking in a few simple steps :1- Fix the lens gear to the camera’s focus ring position
2- Fasten the fixed bracket to the quick release plate of the Gimbal with a hexagonal screw, and insert the aluminium tube.
3- Insert the follower into the aluminium tube and lock the fixed thumb screw on the follower. Move the aluminium tube to adjust the front and rear position to make the follower gear and the lens gear engage, and lock the fixed thumb screw on the fixed bracket.
4- Insert the data cable into the USB port of the fixed plate and the installation is complete.
SKU: MAN-MVGFF -
Stabilisers
Manfrotto MVGBF-CF Fast GimBoom Carbon Fibre
GimBoom is the revolutionary new FAST boom developed by Manfrotto with universal fitting for your Gimbal.
From ground level to overhead position (drone perspective), the new Manfrotto GimBoom allows you to get more versatile and flexible use from your Gimbal, raising your production values to the next level.
Thanks to its standard 3/8” and 1/4” top attachment screw, the GimBoom guarantees an easy connection with your Gimbal. It’s exceptionally compact (hand baggage size with 51cm minimum operating height) and lightweight (800g.) And, thanks to its carbon-fibre construction – capable of taking a payload of 6.5 kg at maximum extension – the GimBoom is also incredibly strong.
The unique FAST Twisting Lock makes it quick and simple to deploy and extend, allowing the user to control the entire boom with a single gesture. With two risers and three telescopic sections, the full extended length is more than double (1.15m/45.27in) the minimum operating length (0.51m/20.07in), while the intuitive graphic design means locking and unlocking the boom have never been easier.
Three thread connectors arranged at 120° on the top of the middle section enable the GimBoom to pair with dedicated GimBoom accessories, with a handy rubber cap to avoid damage when placing it on the ground.
SKU: MAN-MVGBF-CF -
Stabilisers
Manfrotto MVGEXT Extension in carbon fibre for Manfrotto Gimbals
The Carbon Fiber extension is a 257mm/10 inches pole that can be attached to the base of your gimbal.
It is a compact, portable and lightweight accessory that improves your shooting experience, increasing flexibility and versatility. Quick and easy to attach, it allows you to explore a wider range of perspectives and creative angles.
It is compatible with most of the gimbals available on the market, thanks to ¼-inch threaded studs and threaded holes on the top and bottom of the handle.SKU: MAN-MVGEXT -
Stabilisers
Tilta Armor man 3.0 Arm (L)
This shock-absorbing stabilized left arm for the Armor Man 3.0 attaches to the back of the Armor Man 3.0 vest when in the normal operating mode and can also be attached to the top of the vest when operating in the overhead configuration. When engaged, the arm has two adjustable tension knobs to allow you to adjust for the weight of your gimbal/camera rig as well as your preferred operating style (whether you want the arms bowed out away from your body or tight and compact to your body).
You can attach a variety of gimbal supports to the end of the arm to allow you to use the Armorman with any kind of 3-axis gimbal, whether a top bar-based gimbal, a ring-based gimbal, or even if you want to use the Nucleus-M handles on your gimbal. Each of these supports attach to the arm on a sliding dovetail-based system so that you can adjust them for maximum comfort based on your operating preferences.
SKU: TIL-ARM-T03-A-L -
Stabilisers
Manfrotto MVG300XM Professional 3-Axis Modular Gimbal up to 3.4kg
Manfrotto Modular Gimbal MVG300XM is a professional 3-Axis Stabilized Handheld Modular Gimbal. The handle can be easily detached to be used as a remote control and allows the gimbal to be used in combination with many different types of support.
Designed for CSC and DSLR cameras*, it can support up to 3.4 kg / 7.495 lbs and is perfect for videographers looking for versatility and modularity.The Gimbal handle features a LCD touch screen allowing easy choice of settings. A joystick enables straightforward operation of gimbal movements, while a multifunction knob provides greater control and focus control*.
When the handle is detached, it allows the gimbal to be controlled remotely and thanks to the integrated gyro, the handle movements can be mimic.
Balancing is made easier with a position memory red dot on both the vertical and cross arms.
300XM Gimbal offers different shooting modes including:
– Timelapse
– Inception
– Panorama
– Portrait
– SelfieIt is also supplied with a removable rear versatile handle that can be used for better support, especially when shooting at different angle. Also included a mini tripod for easy camera installation and balancing.
A dedicated Manfrotto Gimbal 300XM App is available for simple control of your gimbal and allow some functions to be performed remotely.
To prevent shaking and for easy transportation, the motor is equipped with independent locking for each axis.
*Please check the camera compatibility chart in the Downloads section.
SKU: MAN-MVG300XM
