Tilta Power Supply Module for DJI Video Transmitter – V Mount
Designed for ergonomic and lightweight operation. Supports comfortable handling for longer period of time.
Full anti-slip silicone pad for comfortable handling.
Supports mounting to monitors with 1/4”-20 threads.
32mm adjustment range. Adjust the center of gravity for better handling.
Use the 1/4”-20 screws to connect the monitor and the battery plate. Provides added protection the battery mount and the monitor’s contact points.
Multiple built-in mounting points for various accessories. Easily accommodates efficient handheld setup.
Supports expansion Module for DJI Remote Monitor
This Power Supply Module is the perfect mounting and power solution for the DJI Video Transmitter.
The front and back plates of the module can be installed on both sides of the video transmitter.
The front side of the module allows you to mount your DJI Video Transmitter to a Gold/V-Mount Battery Plate on your camera system.
The back side then allows you to mount a Gold or V-Mount battery to the transmitter which can provide power to the transmitter as well as pass power through the module to the camera body.
This is a fantastic option for those who are looking for a clean and convenient way to mount and power the DJI transmitter.
NOTE: These Plate can only mount to the transmitter in one configuration which will position the SDI ports on the Operators side and the LCD Screen/Control Knob on the Assistant’s side.
V-Mount
1：Power Supply Module for DJI Video Transmitter – V Mount
2：3mm Hex Key (4.04.199-000000-031.00)*1
Gold Mount
1：Power Supply Module for DJI Video Transmitter – Gold Mount
2：3mm Hex Key (4.04.199-000000-031.00)*1
Dimensions: 7 x 4.5 x 4 inches
Weight: 0.88 lbs
Materials: Aluminum-alloy, stainless steel
Color: Black
$243.00
Related products
-
-
Camera rig attachments, brackets and components
Manfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
Camera rig attachments, brackets and componentsManfrotto Rods 300mm for Camera Cage Fits MVCCS, MVCCM, MVCCL paired with MVCCBP
These 300mm (11.8”) long Rods are one of the basic building blocks of all SYMPLA rigs, and are always used in parallel pairs to create a track which allows components to be mounted and positioned correctly.
Rods can be united to make longer tracks (using the included screw junctions), joined at different heights using the V-Offset component, or shifted laterally using the H-Offset component. Although the possible uses are numerous, these long Rods primarily serve as the track for SYMPLA Fixed or Variable Plates, since the extra length allows a wide range of camera and lens (and viewfinder) combinations to be correctly positioned for the operator and for other SYMPLA components, such as the Flexible Mattebox.
Made in 15mm (0.59”) diameter tubular aluminum for strength and reduced weight, 300mm Rods are the longer of SYMPLA’s two sizes. Supplied as a pair, with two 1/2”-13UNC screw junctions included.
SKU: MAN-MVA520W -
Camera rig attachments, brackets and components
SmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
Camera rig attachments, brackets and componentsSmallRig 3206 Sunhood for Sony Alpha 7S III/Alpha 7C/ZV-1/FX3 Camera
1. Dedicated Shading Hood for Sony Alpha 7 IV / A7S III / A7C / ZV-E1 / ZV-E10 / ZV-1F / ZV-1 II / ZV-1 / FX3.
2. Reduces reflections during shooting and shades the screen.
3. Slide-in mounting, fastened by hook & loop.
4. Raised internal edges for stability and to prevent twists.
5. Folded flat for transport and storage.SKU: SRI-3206 -
Camera rig attachments, brackets and components
SmallRig 2060 Cold Shoe 2-Pack
1. It includes 2pcs of the cold shoe, and it could attach camera accessories with 1/4″-20 and M2.5 threads, such as cage, cold shoe block, and so on.
2. It enables the mounting of on-camera lights, shoe handles, microphones,s and more for additional attachment.
3. The counterbore hole in the center is attachable to the 1/4’’-20 screw, but the 1/4’’-20 screw will not touch the hot shoe contact of accessories mounted on the cold shoe.
4. There comes with two secure bending bevels on one end to prevent accidental removal.
5. The arrowheads on the cold shoe show the direction to mount additional accessories.SKU: SRI-2060 -
