-
×
TecArt ArtNode 2 - 2 Universe
1 × $502.86
Subtotal: $502.86
Data and DMX distribution
Visual Productions DIN Rail DMX/RDM 4 Channel Relay
DMX512-A (ANSI E1.11)
RDM (ANSI E1.20)
9-24V DC 5W (PSU optional)
For maximum loads please consult the datasheet
$640.00
The RdmRelay is a DIN rail mounted device with 4 relays. Controllable via DMX and RDM, the RdmRelay is a powerful tool in any lighting installation.
Remote Device Management
The device can be set by RDM. This allows the start address to be set via any RDM commissioning tool. The relays are controlled via four DMX channels.
Heavy Duty Relays
The RdmRelay is equipped with four heavy duty relays. The relays can switch 110V/230V equipment up to 16 Amps per relay. This is ideal for controlling non-DMX equipment or switching off a lighting installation.
Combine with other products from the family
The DmxMerger can easily be combined with the CueCore2 and QuadCore lighting engines. Or the IoCore2, a GPI, GPO & RS-232 interface module. And the B-Station and Kiosc.
Related products
-
Data and DMX distribution
Chauvet DJ DataStream DMX Optical Splitter
The Datastream 4 by Chauvet DJ is designed to allow 4 additional daisy-chains to be added and still allow the original signal to continue through. This is perfect for long runs of DMX where multiple batches in different locations are used.
SKU: CDJ-DATASTREAM -
Data and DMX distribution
TecArt Main/Backup Switcher Rack Mount DMX 8 in 4 out
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX streams as soon as the main inputs are disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The unit is available with up to 4 main DMX streams and 4 backup DMX streams. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
TecArt Splitter Rack Mount RDM 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
SKU: n/a -
Data and DMX distribution
Chauvet DJ DMX-AN2 ArtNET DMX Node
Chauvet DJ DMX-AN2
The Chauvet DJ DMX-AN2 is a multi-purpose Art-Net/sACN node that converts 1 Ethernet cable to 2 DMX universes. Its optical and electrical isolation is ready for any situation and the durable Neutrik® etherCON® in/through port ensures reliability. The built-in web-based GUI means no universe/subnet setup. DMX-AN2 automatically redirects the web page if the IP address is changed. The unit supports Power over Ethernet (POE) or an external power supply. Both outputs can be set to either Art-Net or sACN and DMX-AN2 functions as an Art-Net to DMX or DMX to Art-Net interface. Onboard LED indicators quickly inform status and the integrated mounting bracket is included to quickly install into any location.SKU: CDJ-DMXAN2 -
Data and DMX distribution
TecArt Splitter Rack Mount DMX 8 way
The TecArt range of data splitters are available as 19” rack mount units.
The units are available with a choice of 3 or 5 pin connectors. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
SKU: n/a
