1 HU
130mm (5.1′) deep
$230.00
The Rackmount enables you to mount two CueCores, QuadCores, IoCores or TimeCores into a 19′ wide rack.
The unit is fitted with a blind panel to cover one mounting position.
The TecArt Main/Backup Switcher is primarily used for main and backup consoles. The unit automatically detects incoming DMX512, and automatically switches to the backup DMX stream as soon as the main input is disconnected or lost.
The TecArt Main/Backup Switcher can also be used to connect an external console to a live DMX network and will automatically switch over to take control.
The units are available with a choice of 3 or 5 pin connectors.
The TecArt Manual Switcher is used to switch between two lighting desks, with up to 4 DMX universes for each desk. The inputs are connected via front panel XLR connectors and the output connectors are on the rear of the unit. Each input/output has a separate power supply and is electrically isolated to ensure the highest possible level of protection.
The units are available with a choice of 3 or 5 pin connectors, and are also available in 1, 2 or 3 inputs/outputs.
The TecArt Merger is a 19” rack mount unit with 2 into 1 merging.
The DMX512 Merger combines data from two separate DMX512 inputs and provides a single merged data output on a HTP (Highest-Takes-Precedence) basis.
The unit can also have the merged output split across 8 opto-isolated outputs with separate drivers and power supplies.
The units are available with a choice of 3 or 5 pin connectors.
The TecArt range of data splitters are available as desktop units.
Each output has a separate driver and opto-isolator to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.
DMXS4DT can be supplied with an external 12 – 48VDC power supply.
FEATURES
• DMX-512 In/Out/Thru.
• External Power Supply 12 – 48VDC.
• 2 Main indication LEDs.
SPECIFICATIONS
• Input voltage: 12 – 48VDC.
• Power supply: External.
• Total power: 6W @ 24VDC.
• Dimension: 105mm (L) 85mm (W) 60mm (H).
• Mounting method: Desktop.
• DMX signal input: XLR.
• DMX signal output: XLR.
• Outputs: 4 Opto isolated.
• Temperature: 0 – 40 degree Celsius.
Chauvet DJ DataStream8
The Chauvet DJ Data Stream 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals from dual inputs into 8 separate outputs via a master 3-position switch. Each input can be used simultaneously and sent to any output. Individual 2-position switches can also send data from either the A or B input separately. Each of the outputs is optically isolated from the others providing protection in the event of a short. A threaded insert allows the unit to be safely secured to trussing.
Backstage Mag C-Stand Holder (4) 
Nikon BF-1B Body Cap 
Blackmagic Design Power Supply Converters 12V12W Locking 
Chauvet DJ DMX-RT4 DMX Recorder 
