Tentacle Sync E Timecode Generator - Standard Set of 2 Subtotal: $625.00
Audio
Wisycom BFA-B-F1 Wideband Active UHF Antenna Amplifier
- Low-Noise Signal Booster for Antennas
- Remote Control BNC Plug
- Tunable 430 to 740 MHz Filter
- Selectable 410/470/510 MHz HPF
- Selectable 600/700/810 MHz LPF
- Stepped RF Gain from -12 to +27 dB
- Easy Configuration via TFT Display
- Fixed 940 to 960 MHz Band Saw Filter
- Pass-Thru DC Selection for Cascading
- Waterproof with Gasket Sealing
$1,667.58
The Wisycom BFA-B-F1 is an active antenna signal booster that combines a low-noise amplifier with a unique bank of filters for enhanced reception in numerous environments. Sporting a remote-controllable BNC coax plug and selectable 410/470/510 MHz high-pass filters and 600/700/810 MHz low-pass filters, this booster makes it easier to get clear signals anywhere.
| Brand |
|---|
Related products
-
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio
Apogee Boom 2×2 USB-C Audio Interface
Whether you’re a musician, podcaster, or live streamer, Apogee BOOM will inspire you to take your projects to the next level. Perfect for beginners and pros, BOOM features legendary Apogee sound quality and onboard DSP for tone-shaping your recordings, all at the most affordable price ever for an Apogee 2×2 USB audio interface.
Best-in-class Apogee conversion and mic preamp technology
Bus powered
Up to 24 bit / 192kHz recording
Low profile design with aluminum body
On-board hardware DSP for low-latency recording with Apogee FX
1x ¼” Instrument input
1x Combi mic/line/instrument input
2x ¼” Balanced outputs
1/4” Headphone outputSKU: APO-BOOM -
Audio
AUDIX F5 Fusion All Purpose Instrument Microphone Excellent for Snare, Guitar Cabs, Brass and Vox Hypercard
AudioAUDIX F5 Fusion All Purpose Instrument Microphone Excellent for Snare, Guitar Cabs, Brass and Vox Hypercard
AFFORDABLE DYNAMIC INSTRUMENT MICROPHONE
The Fusion Series microphones represent affordable excellence.
The f5 dynamic instrument microphone is an ideal choice for snare, toms, percussion, and acoustic instruments in live and studio applications. A Hypercardioid pick-up pattern helps to minimize feedback and isolate the instrument from ambient sound.
The f5’s low impedance and balanced output allow interference-free performance.
Designed, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x f5 Instrument Microphone
- 1x MC1 Microphone Clip
- 1x P1 Carrying Pouch
SKU: ADX-F5 -
Audio
Tentacle Sync TRACK E Basic Box
For YouTube, Vlog, Music, Journalism
Locking 3.5mm Microphone Input
Wireless Control and Monitoring via App
Timecode I/O via 3.5mm Connector
Wirelessly Sync Multiple TRACK E Units
Wireless Timecode Sync to SYNC E
Supports up to 32GB MicroSDHC Card
32-Bit Floating Point & 24-Bit Recording
48 kHz Mono Recording
10-Hour Built-In Rechargeable BatterySKU: TTS-TR1-B -
Audio, Audio accessories
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
The RODE DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed to help minimize wind noise and improve audio recording clarity in windy environments.
The DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, whilst ensuring a secure fit specifically suited to the VMP+ Microphone.
The DeadCat VMP+ is only compatible with the VideoMic Pro+ (released September 2017). For other VideoMic Pro models please see the DeadCat VMP and DeadCat VMPR.
SKU: ROD-DEADCATVMP+
