The Rackmount enables you to mount two CueCores, QuadCores, IoCores or TimeCores into a 19′ wide rack.
The unit is fitted with a blind panel to cover one mounting position.
Subtotal: $1,882.24
1 HU
130mm (5.1′) deep
$230.00
The Rackmount enables you to mount two CueCores, QuadCores, IoCores or TimeCores into a 19′ wide rack.
The unit is fitted with a blind panel to cover one mounting position.
Contact us for dealer pricing.
The ArtNode 2 is an ArtNet to dual-purpose DMX node for architectural and entertainment lighting control applications.
FEATURES
• Multi mode: ArtNet to DMX, 2 x DMX to ArtNet.
• External power supply 9-24VDC (supplied separately).
• Robust housing.
• 2 main indication LEDs.
SPECIFICATIONS
• Input Voltage: 9–24VDC.
• Power: 6VA (at 24VDC).
• Dimensions (mm): 117 L x 115 W x 53 H.
• Mounting Options: Desk-mount.
• DMX Input/Output: 5-pin XLR.
• Outputs: 2 x DMX Universes.
• Inputs: 1x Ethernet
• Operating Temperature: 0 – +40°C.
The TecArt Merger is a 19” rack mount unit with 2 into 1 merging.
The DMX512 Merger combines data from two separate DMX512 inputs and provides a single merged data output on a HTP (Highest-Takes-Precedence) basis.
The unit can also have the merged output split across 8 opto-isolated outputs with separate drivers and power supplies.
The units are available with a choice of 3 or 5 pin connectors.
Chauvet DJ DataStream8
The Chauvet DJ Data Stream 8 is a flexible DMX splitter designed to distribute and boost incoming DMX signals from dual inputs into 8 separate outputs via a master 3-position switch. Each input can be used simultaneously and sent to any output. Individual 2-position switches can also send data from either the A or B input separately. Each of the outputs is optically isolated from the others providing protection in the event of a short. A threaded insert allows the unit to be safely secured to trussing.
The TecArt range of data splitters are available as truss mount units.
The units are available with a choice of 3 or 5 pin connectors and have 4 outputs. Each output has a separate driver, opto-isolator and power supply to ensure the highest possible level of protection.
The unit is available as a standard DMX splitter or with the option of RDM.
RDM compliant device “ANSI/ESTA E1.20 Entertainment Technology – Remote Device Management over USITT DMX512”.
RDM or Remote Device Management is a protocol enhancement to DMX512 that allows Bi-directional communications between light fixtures and lighting consoles or RDM specific software over a standard DMX line.