Built with CRMX modules from LumenRadio for filmmakers, broadcasters, and others, the TimoLink TX Wireless DMX Transmitter from Godox converts a wired DMX console to wireless by sending signals to CRMX-compatible fixtures or receivers. The TimoLink TX supports automatic frequency hopping and has a CRMX transmission range of up to 300m. The male, five-pin XLR connector rotates up to 270? for wider compatibility with different interface designs. The unit also comes with a test feature that detects whether or not a DMX signal is successfully outputted, and to simplify operational logic and enhance efficiency, the set and reset button were designed separately.
Godox Timolink TX DMX Transmitter
Built-In LumenRadio CRMX Transmitter
Up to 300m Long-Range Transmission
5-Pin Male XLR Connector Rotates 270?
Test Function Checks Connection Status
$280.31
Related products
-
Wireless DMX distribution
Chauvet DJ DFi-USB Wireless DMX USB
0 out of 5(0)The Chauvet DJ DFi-USB is the new compact wireless USB-DMX transceiver for compatible lighting fixtures. Perfect for bands, DJs, and venues wanting amazing lighting shows without the mess of DMX cables.
SKU: CDJ-DFI-USB$79.00 -
Wireless DMX distribution
Beamz BBP Wireless DMX Transceiver
0 out of 5(0)Beamz BBP Wireless DMX Transceiver
The Beamz BBP Wireless DMX transceiver is a?compact wireless DMX transmitter/receiver which can control up to 7 universes. Universes are marked with a coloured LED in the chassis. You can use multiple receivers on a single transmitter.SKU: BMZ-BBP-WDMX$99.00 -
Wireless DMX distribution
Exalux Connect RX-100s CRMX Receiver
0 out of 5(0)Exalux Connect RX100s is a standalone wireless DMX receiver especially designed to be powered through the USB connectors of a LED panel. RX100s can also run up to 10 hours with the small Exalux PowerBank battery.
RX100s suits with any LED fixture thanks to the flexible connector on cable system.
SKU: EXL-CNT.000.005$615.00 -
Wireless DMX distribution
RatPac Cintenna 2 CE CRMX Transceiver Granite Gray
0 out of 5(0)The slimmer, splash resistant wireless DMX Solution. Enable any legacy fixture with a DMX input to be controlled wirelessly by plugging a Cintenna 2 in receive mode into it. Or use it as a wireless transmitter in a pinch: Using a DMX Male-to-Male Turnaround, plug a DMX output to a Cintenna 2 set to transmit mode. It will be able to transmit up to 512 channels of DMX to any linked LumenRadio CRMX-enabled receivers including other Cintenna 2s set to receive mode. Backwards compatible with early model RatPac Cintenna units and RatPac AKS devices.
*Results vary with previous generation lamps- always test before using.
SKU: RPC-531.0276.001.0A$1,345.78