-
×
Aputure 2X Fresnel Attachment Bowens Mount
1 × $197.00
Subtotal: $197.00
Battery adapters and DC couplers
Accsoon ACC04 NP-F Battery Plate
For PowerCage II & PowerCage Pro II
2 x USB-C Charging Ports
Supports Sony NP-F Battery
$59.00
Extend the power of your iPad, iPad Pro, or other mobile devices while on location with the ACC04 NP-F Battery Adapter from Accsoon. Fitting a separately purchased Sony NP-F battery with two USB-C and one USB-A charging ports, and a 6.6 to 8.4V DC output, this compact adapter provides extra power to your device while working on set. Although the ACC04 is primarily designed to be mounted onto PowerCage II and PowerCage Pro II with a 1/4″-20 mount, it can also be used as a standalone charger for almost any device. Please note that charging cables are not included.
Related products
-
-
Battery adapters and DC couplers
Blackmagic Design Blackmagic Pocket Camera Battery Pro Grip
The Blackmagic Pocket Camera Battery Pro Grip adds two extra NP-F570 batteries to the 6K G2 and 6K Pro for over 3 hours of shooting on a single charge. That’s a massive battery life, in a compact design that integrates seamlessly with the camera. Featuring a unique carbon fiber design, non‑slip hand grips, and a slide out tray, the battery grip makes long shoots easier because it gives you more to hold onto. You can view the status of the grip’s batteries on the touchscreen display, and charge the batteries via the camera’s 12V DC power connection in between takes!
SKU: BLA-CINECAMPOCHDXBT2 -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
Battery adapters and DC couplers
Nanlite BT-BA-V Battery adaptor V-Mount
Attach a V-Mount battery to a light stand and power your Forza 60, Pavotube 15C, or 30C.
The Nanlite BT-BA-V can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube of Forza. The DC output is suitable for the Forza 60, Forza 60B, Pavotube 15C, and Pavotube 30C.
SKU: NAN-NNBTBAV -
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24
