Showing 46–60 of 552 results
This 20cm USB-C cable was specifically designed to integrate with the Tilta BMPCC 4K camera cage. It’s designed with a 90-degree connection on each end so that the cable perfectly hugs the side of the cage.
This 30cm USB-C cable was specifically designed to integrate with the Tilta BMPCC 4K camera cage. It’s designed with a 90-degree connection on each end so that the cable perfectly hugs the side of the cage.
This 95mm Polarizer Filter was developed in close collaboration with top tier optical manufacturers to create a high end rotatable circular polarizer uniquely fitted for the Tilta Mirage Matte Box.
Using new PL + CPL technology, this Polarizer Filter can produce accurate and vibrant colors by limiting reflected light and preventing unwanted glare caused by reflective surfaces such as water or glass.
The 95mm Polarizer accommodates the same lightweight configurations as the VND Module and can be secured directly to a 95mm lens or Adapter Ring via the Lightweight Filter Clamp-On Adapter.
The Polarizer module can be wirelessly controlled by an optional Wireless Motor to remotely rotate the filter which can offer more flexibility and save time while shooting.
NOTE: This is not compatible with and cannot be used at the same time as the 95mm Variable ND Module
This Stackable Circular Filter Tray Holder replaces the Rubber Hood on the Tilta Mirage Matte Box and allows you to secure an additional 95mm Circular filter in front of your lens.
This is the perfect solution for using 95mm circular special effect filters at the same time as the VND Module and also allows you to mount the Rubber Hood to the front of the Tray.
This allows you mount a maximum of (4) 95mm circular filters when using Dual Filter Trays. Only one Stackable Filter Tray can be mounted at a time.
NOTE: To prevent vignetting, you will need to use focal lengths beyond 35mm for Full Frame and 24mm for S35.
The Wireless Motor cannot be mounted to the VND Module when inserted in the Stackable Tray’s Filter Slot.
The Power Supply for Tilta Mirage Motor is not compatible when using the Stackable Filter Tray.
The 95mm Variable ND for Tilta Mirage was developed in close collaboration with top tier optical manufacturers, the VND module accommodates multiple configurations, the lightest being only 130g.
Using new PL + CPL technology, the VND module can produce accurate colors even at its maximum density.
The Variable ND can be gradually adjusted, allowing you to keep consistent exposure when lighting conditions change unexpectedly.
The module has built-in hard stops between ND 0.3 ~ ND 2.7 to ensure no risk of an X-Pattern Cross Shadow.
The VND module can be wirelessly controlled by an optional micro motor to remotely adjust the ND level which offers more flexibility while shooting.
This lens adapter support attaches to the Full Camera Cage for the Sony FX9 and FX6.
It improves the flexibility of the cages’ existing support system and allows you to easily secure various lens adapters.
This Adapter is specifically useful for securing the Sony E Mount to Canon EF Mount Lens Adapter.
These extender arms attach to the NATO rails on the side of the gimbal to provide you with adjustable rosette-based arms so that you can attach a variety of rosette-based operating handles to your setup.
Compatible with the DJI RS2, RSC2, RS3, and RS3 Pro.
Mount accessories via 1/4″-20 Thread and a Cold Shoe Receiver
supports a Wide Range of Smartphones
Supports Devices 58mm to 110m and Up to 15mm Thick
Offer Additional Security and Provide Dampened Clamping
Include Table Top Tripod Setups and Vehicle Interior Rigs
This Adjustable Top Handle can rotate 180 degrees to fulfill your vertical shooting needs.
The handle is adjustable forward and backwards in either position to help you find your camera build’s center of gravity no matter which orientation you are shooting in.
Compatible with Camera Cage for Sony FX6, FX3, and FX30.
This Advanced Control Knob for Tilta Mirage mounts directly to your Variable ND or Polarizer Filter in order to provide a more comfortable and precise option for adjusting the density of your filters.
The Control Knob attaches directly to these filters via two M3 threads which allows this accessory to be used in multiple situations, even when the filter is mounted directly to the lens via our Lightweight Clamp-On Adapter.
This accessory is the perfect solution for anyone who frequently needs to manually control their Variable ND or Polarizer.
This Advanced I/O Module utilizes an integrated V-RAPTOR EXT Cable that expands communication with the camera body and offers increased functionality for Run Stop and Timecode via additional ports.
This Module can be mounted in a few different locations on the V-Raptor’s Camera Cage including the Top Handle, Top Plate, Bottom Mounting Plate or the integrated slot on the Battery Plate which can power and support the module.
When mounting the module in different locations other than the Battery Plate, the module can be powered via a 2 Pin Lemo input.
This allows this module to be incredibly versatile in terms of where and how it can be mounted to accommodate almost any camera build.
This Module includes a 3 Pin Fischer R/S port which allows users to trigger Run Stop and power a Nucleus M with a single cable via an optional 3 Pin Fischer Run Stop Cable.
The Module includes the following ports:
(1) 14.8V 2-Pin LEMO Input/Output
(1) 3 Pin Fischer R/S Port
(1) Timecode Port
(1) Red CTRL Port
(1) Genlock Port
Compatible with the original battery grip from Blackmagic Design. Under the half cage setup, remove the bottom plate and secure it to the bottom of the battery grip.
With the original battery grip mounted, the 15mm rod holder and 15mm rods can be installed to mount a follow focus, lens support, etc.
Newly patented viewfinder extension. Provides a fully immersive operating experience.
Find your best viewing angle. Easily adjustable for different user’s operating needs. Provides the best view for operating.
Extremely adjustable. The connecting joint supports 360° adjustment. The support arm can be adjusted both horizontally and vertically.
The top plate has 3 built-in cold shoe mounts and 1/4”-20 screw holes for mounting various accessories.
Supports the new Tilta M.2 SSD case. Easily mounts onto any 1/4”-20 screw holes on the camera cage.
Compatible with T5 and T7 SSD drives.
Includes ARRI Compatible Rosette, 1/4”-20 Screw Holes with Locating Points, and NATO Rail.
90° angled cable adapter for more secured mounting. Provides more efficient operating and data protection.
With the NATO rail adapter mounted, it can be installed to any 1/4”-20 screw hole.
Reserved space for securing an M.2 SSD case.
From Blackmagic Design.
Arm your camera with the Tiltaing Camera Cage for the Blackmagic Pocket Cinema Camera 6K Pro and 6K G2.
This Basic Kit for the BMPCC6K Pro/G2 provides protective armor for the camera body and includes relevant accessories to improve functionality.
The Full Cage offers several 1/4”-20 threads with locating pins, cold shoe receivers, a NATO Rail for Type IV and VI Side Handles, as well as Rod Attachment Ports for our Single Rod Holders.
It also features ARRI compatible rosettes, which are specifically designed for our Adjustable Top Handle Plus for more flexible operating and handling.
The right side arm module can be removed to turn this Full Cage into a Half Cage.
This offers more flexibility in situations where lighter builds are required such as when using a gimbal.
The Bottom Plate provides several ¼”-20 mounting points for attaching your camera to various quick release plates and is compatible with the ARCA Receiver of the RS2 Mounting Plate.
When using the Half Cage, the bottom plate can be extended to support the Black Magic Design Battery Grip.
A 15mm rod mount can be installed to support 15mm rods in front of the camera body when using the Battery Grip in a Half Cage setup.
When not using the Battery Grip, the included Quick Release Plate can be used to connect the camera cage to the included 15m LWS Baseplate Type VI.
The 15mm LWS Baseplate adds 15mm rod support to the system and allows you to mount rod based accessories such as matte boxes and follow focus systems.
The bottom of this baseplate natively connects to our Tilta Standard Dovetails and also supports various quick release plates via 1/4″-20 and 3/8″-16 threads.
The Advanced Power Handle mounts to the left side of the cage via a NATO Rail connection.
This handle features a 12V Micro DC Port (3.5/1.35mm) and an 8V USB-C port for powering your camera body or other accessories like our Nucleus Nano Wireless Lens Control System.
The handle is also able to control Run Stop on the BMPCC 6K Pro/G2 via an included Run Stop Cable.
The rotation of the handle and additional hand strap allows for comfortable and flexible operation of your camera system when shooting handheld.
The included Quick Release Top Handle can be attached to the top of the cage via a cold shoe receiver and can be further secured by a 1/4”-20 screw.
This provides an extremely secure connection to comfortably handle and operate your camera when shooting low angles.
The Top Handle features additional 1/4”-20 threads, cold shoe receivers and a horizontal 15mm rod holder for mounting external monitors or EVFs.
The SSD Drive Holder attaches directly to the cage via a 1/4″-20 screw and locating pin.
It can then clamp onto a m.2 SSD drive, securing it to your camera setup and allowing you to record footage onto a separate SSD card.
The included USB-C cable is then able to screw into the SSD Holder and the Side Panel of the Cage near the USB-C Port.
This creates an extremely secure connection between your camera and drive.
The 90 Degree HDMI Adapter mounts to the cage near the camera’s HDMI port and offers a secure connection that limits wear on the port itself.
NOTE: If you receive a kit with a T7 Holder, please contact us at: [email protected]
1:Full Camera Cage for BMPCC 6K Pro *1
2:Tiltaing Quick Release Handle *1
3:Tiltaing SSD Drive Holder for T5 *1
4:Tiltaing Left Side Advanced Power Handle with Run/Stop (F570 Battery) *1
5:Tiltaing Advanced Left Side Handle Attachment Type VI *1
6:Advanced Side Handle Run/Stop Cable for USB-C Port(RS-TA3-USBC)*1
7:Tiltaing 15mm LWS Baseplate Type VI *1
8:HDMI 90-Degree Adapter for BMPCC 4K/6K（TA-T01-HDA-90）*1
9:90-Degree USB-C Cable (30cm) for BMPCC 4K/6K（CB-USBC-30）*1
10:Aluminum rod 15*200mm Black *2
11:Aluminum rod 15*100mm Black *2
12:Connection Screw for 15mm Rod *2
13:Accessory Mounting Bracket for BMPCC 6K Pro Battery Grip *1
Dimensions: 13 x 6.5 x 3.5 inches
Weight: 3.1 lbs
Net Weight: 0.4 lbs
Materials: Aluminum alloy, stainless steel
Color: Black, Tactical Gray
Beamz AC-60 Padded Lighting Bag 
Dynacore D-MS-NP(7.2V) Adapter Tiny V-Lock to NPF 
Think Tank Airport Accelerator 
PortKeys BM5 III WR 
