On camera monitors
Showing 16–30 of 41 results
-
On camera monitors
PortKeys BM5 III WR
The Portkeys BM5 III WR is a lightweight, rugged 5.5-inch Wide Color Gamut on-camera monitor with 2,200nits of brightness, HDMI/SDI video inputs, one SDI output with HDMI cross-conversion and wired/wireless camera control capabilities.
Key features:
- 5.5-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
- Daylight-viewable with a maximum brightness of 2,200nits.
- 1 x 3G-SDI input, 1 x HDMI input, 1 x 3G-SDI output with cross-conversion.
- Professional monitoring tools: Waveform, Vectorscope, Peaking, ARRI False Color.
- 3D LUT monitoring and 3D LUT SDI output capabilities.
- RED Approved: wireless camera control for the RED Komodo and V-RAPTOR.
- Wireless camera control for most Sony and Blackmagic Design cameras.
- Wired camera control for Sony, Canon, Panasonic, BMD, and ZCAM E2.
- TILTA Nucleus N/M wireless follow focus wired control.
- Built-in Sony NP-F style battery plate.
- 4-pin 7.4V-24V power input for external power (D-Tap cable included).
- Lightweight and rugged aluminum housing: only 376g/13.2oz.
SKU: PKY-PK-BM5-III-WR -
On camera monitors
PortKeys BM7 II DS
The Portkeys BM7 II DS is a rugged 7-inch touchscreen monitor and an evolution based on the worldwide success of the BM5 III WR. This monitor features a maximum brightness of 2,200nits, HDMI input/output ports, two SDI inputs and one SDI output with HDMI cross conversion, and wired/wireless camera control capabilities.
Key features:
- 7-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
- Daylight viewable with a maximum brightness of 2,200nits.
- Factory color-calibrated: 100% coverage of Rec.709 and 85% coverage of DCI-P3.
- 2 x 3G-SDI input, 1 x HDMI input, 1 x HDMI output, 1 x 3G-SDI output with cross-conversion.
- Split screen monitoring, you can monitor two video inputs simultaneously.
- Professional monitoring tools: Waveform, Vectorscope, Anamorphic, Peaking, ARRI False Color.
- 3D LUT monitoring and 3D LUT SDI output capabilities.
- RED Approved: wireless camera control for the RED Komodo and V-RAPTOR.
- Wireless camera control for most Sony and Blackmagic Design cameras.
- Wired camera control for RED, Sony, Canon, Panasonic, BMD, and ZCAM E2.
- TILTA Nucleus N/M wireless follow focus wired control.
- Built-in dual Sony NP-F style battery plates.
- Industry-standard 2-pin LEMO and 5.5mm barrel connector 7.4V-24V power inputs for external power (D-Tap cable included).
- Rugged all-aluminum housing: only 460g/16.2oz.
- Custom JPG picture custom freeze frame.
SKU: PKY-PK-BM7II-DS -
On camera monitors
PortKeys LEYE-SDI
The Portkeys LEYE is a versatile Electronic Viewfinder that features both 4K HDMI and FullHD 1080p 3G-SDI video inputs, all in a compact and lightweight package that can be powered externally or via a single Canon LP-E6 battery. This EVF features a 2.4″ LCD screen with a 1440 x 900 resolution, making it the perfect EVF for mirrorless cameras, while its SDI input makes it a versatile tool so that you can use it on a wide variety of other cameras.
Key features:
- Compact size: 125 x 70 x 78mm / 4.92 x 2.75 x 3.07in.
- Lightweight and rugged housing: only 265g/9.34oz.
- 2.4-inch, 8-bit panel with a 1440 x 900 resolution and 1100:1 contrast ratio.
- Maximum brightness of 450nits.
- 1 x 4K HDMI input, 1 x 3G-SDI input., 1 x 3.5mm audio output.
- Adjustable Red Oak diopter ring with a -3 to +8 diopter range.
- Professional monitoring tools: Waveform, Histogram, Vectorscope, Peaking, False Color.
- 3D LUT monitoring. Monitoring tools can be set before or after the 3D LUT.
- Built-in Canon LP-E6 battery plate.
- 4-pin 7.4V-24V power input for external power (D-Tap cable included)
- Low power draw: only 5W.
- Multiple 1/4″-20 mounting points with locating pins and built-in NATO rail.
SKU: PKY-PK-LEYE-SDI -
On camera monitors
PortKeys LH5P II
The Portkeys LH5P II is the most affordable 5.5-inch Wide Color Gamut on-camera monitor with a stunning maximum brightness of 2,200nits and wired/wireless camera control capabilities. This HDMI-only monitor features a rugged and durable design entirely made of aluminum with a complete set of professional monitoring tools ready for your next creative adventures.
Key features:
- 5.5-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
- Daylight-viewable with a maximum brightness of 2,200nits.
- 1 x HDMI input, 1 x HDMI output, 1 x 3.5mm audio output.
- Maximum input resolution: 4K DCI at 24p or 4K UHD at 30p.
- Professional monitoring tools: Waveform, Vectorscope, Peaking, ARRI False Color.
- 3D LUT monitoring. Monitoring tools can be set before or after the 3D LUT.
- Wireless camera control for most Sony and Blackmagic Design cameras.
- Touchscreen autofocus (wireless) feature is available for select Sony cameras, including the FX3, a7S III, and A7C.
- Wired camera control for Sony, Canon, Panasonic, BMD, and ZCAM E2.
- TILTA Nucleus N/M wireless follow focus wired control.
- Built-in Sony NP-F style battery plate.
- 5-pin 7.4V-24V power input for external power .
- Lightweight and rugged aluminum housing: only 285g/10.05oz.
SKU: PKY-PK-LH5P-II -
On camera monitors
PortKeys LH7P
The Portkeys LH7P features a 7-inch touchscreen monitor with 1,000 nits of brightness, HDMI input and output ports, a professional set of monitoring features, and wireless camera control capabilities compatible with multiple Sony and Blackmagic Design cameras.
Key features:
- 7-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
- Daylight-viewable with a maximum brightness of 1,000nits.
- Supports 4K oversampling to 1080p.
- Professional monitoring tools: Waveform, Vectorscope, Anamorphic, Peaking, ARRI False Color.
- Four user-assignable function buttons.
- Built-in Sony NP-F style battery plate. Low power draw of only 9W.
- Customized peaking range(Peaking Frame).
- Custom JPG picture custom freeze frame.
- Custom rectangular image crop.
- Wireless camera control for Sony and Blackmagic Design cameras.
- Lightweight: only 245g/8.6oz.
SKU: PKY-PK-LH7P-B -
-
On camera monitors
PortKeys PT5 II
The Portkeys PT5 II is an entry-level and very affordable 5-inch Wide Color Gamut touchscreen on-camera monitor. This HDMI-only monitor has a maximum brightness of 500nits and can be powered for hours by Sony NP-F or Canon LP-E6 batteries. Ready for your next creative adventures, the compact and rugged design houses a complete set of professional monitoring tools
Key features:
- 5-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1000:1 contrast ratio.
- Maximum brightness of 500nits.
- 1 x HDMI input, 1 x HDMI output, 1 x 3.5mm audio output.
- Maximum input/output resolutions: 4K DCI at 24p or 4K UHD at 30p.
- Professional monitoring tools: Waveform, Histogram, Vectorscope, Peaking, False Color.
- 3D LUT monitoring. Monitoring tools can be set before or after the 3D LUT.
- The dual battery plate accepts Sony NP-F or Canon LP-E6 batteries.
- 5.5mm barrel connector 7.4V-24V power input. 5V USB-A power input.
- Low power draw: only 7W.
- Lightweight and rugged aluminum housing: only 150g/5.29oz.
SKU: PKY-PK-PT5-II -
On camera monitors
PortKeys PT6
The Portkeys PT6 is a professional entry-level 5.2-inch on-camera monitor with 600nits of brightness, 100% coverage of DCI-P3 color space, HDMI input and output ports, and 3D-LUT output capabilities.
Key features:
- 5.2-inch, 10-bit panel with a resolution of 1920 x 1080 and a 1500:1 contrast ratio.
- Maximum brightness of 600nits, 100% DCI-P3 coverage.
- 1 x 4K HDMI input, 1 x HDMI input.
- Professional monitoring tools: Waveform, Vectorscope, Peaking, ARRI False Color.
- 3D LUT monitoring and 3D LUT HDMI output capabilities.
- Built-in Sony NP-F and Canon LP-E6 style battery plate.
- 5.5mm barrel connector 7.4V-24V power input. 5V USB-A power input.
- Low power draw: only 6W.
- Lightweight and rugged ABS + PC housing: only 170g/6.0oz.
SKU: PKY-PK-PT6 -
On camera monitors
RED Compact EVF
The RED® Compact EVF is a single cable monitoring solution for DSMC3™ camera systems. It features a 1080p micro-OLED display and user-assignable buttons to quickly access tools such as peaking and magnify, or assignable to control the camera’s settings such as ISO, FPS and White Balance.
The RED Compact EVF includes an adjustable diopter, a quick-connect mount for use with the RED EVF Mount or a 1/4-20 mount plate for use with third-party options, and an updated secure eyecup mounting system that also allows the operator to easily replace the eyecup.
SKU: RED-730-0030 -
On camera monitors
RED Compact EVF Pack
The RED® Compact EVF Pack is compatible with KOMODO-X™ (Firmware support coming Q1 2024), V-RAPTOR®, and V-RAPTOR XL cameras. The pack includes the RED Compact EVF, a DSMC3™ Adapter A, a RED EVF Mount, and an 18” Right-to-Straight EVF cable.
This pack is ideal for users looking for a highly flexible EVF monitoring solution for their DSMC3 camera system. The EVF Mount allows you to easily position the RED Compact EVF to find your optimal operating configuration. The DSMC3 Adapter A provides a single 16-pin output to supply power, video, and data to the EVF. The RED Compact EVF gives a clear, sharp viewing experience, and allows the operator to control and adjust key camera parameters such as FPS, ISO, and White Balance, or to quickly toggle user-assignable camera features with the integrated rear buttons.
SKU: RED-790-0762 -
On camera monitors
SmallHD 702 Touch On-Camera Monitor
The 702 Touch is a cinematographer’s best friend. With a ruggedly built frame, highly visible display, plenty of signal and power options, and world-class software tools, this 7-inch on-camera monitor will make any 1st AC or Director of Photography smile.
It’s extremely durable without adding bulk, it’s daylight viewable without consuming enormous amounts of power, and it’s 100% DCI-P3 colour accurate. With flexible signal options and world-class software tools, the 702 Touch offers ultimate versatility.
SKU: SHD-33.1.MON-702-TOUCH -
On camera monitors
SmallHD 703 UltraBright On-Camera Monitor
The all new SmallHD 703 Ultra Bright is the brightest 7″ monitor available packing a huge 2500+ nits brightness. The 703 Ultra Bright ships as a 10-bit, 1920×1080 resolution monitor with a completely redesigned milled aluminium unibody and optically bonded gorilla glass screen makes the 703 extremely rugged and durable.
New features include HDR Preview, customisable function buttons along with the ability to use the SDI out which doubles as a second SDI input for dual view mode for A/B camera.
SKU: SHD-33.1.MON-703U -
On camera monitors
SmallHD 703 UltraBright V-Mount Directors Kit
The all new SmallHD 703 Ultra Bright is the brightest 7″ monitor available packing a huge 2500+ nits brightness. The 703 Ultra Bright ships as a 10-bit, 1920×1080 resolution monitor with a completely redesigned milled aluminium unibody and optically bonded gorilla glass screen makes the 703 extremely rugged and durable.
New features include HDR Preview, customisable function buttons along with the ability to use the SDI out which doubles as a second SDI input for dual view mode for A/B camera.
SKU: SHD-33.1.MON-703U-VM-DK -
On camera monitors
SmallHD Cine 5 1080p SDI/HDMI 2000nit LCD Monitor
Monitor your camera with the CINE 5 Touchscreen On-Camera Monitor from SmallHD. Featuring a sharp 5″ display suitable for indoor or outdoor use, the CINE 5 monitor supports various HD and SD formats via one full-size HDMI input, one HDMI output, one 3G-SDI input, and one 3G-SDI selectable input/output. The monitor also supports cross conversion from HDMI to SDI and from SDI to HDMI.
The CINE 5 features a bright 2000 cd/m², 1920 x 1080 LCD touchscreen with 3D LUT compatibility. Using the intuitive PageOS 5, you can turn on and save pages of various monitoring tools and focusing aids with a finger tap, and the CINE 5 also adds a joystick on the side and a button on the back for ease of use. There is a 5-pin USB output to utilize optional RED camera control. The monitor can be powered using its 2-pin power input.
SKU: SHD-33.1.16-0526