-
×
AUDIX F50 All Purpose Vocal Microphone Cardioid
1 × $99.00
Subtotal: $99.00
Audio
Ambient Lockit (ACN-CL) – Timecode and Sync Generator
Highly accurate Timecode & Sync generator
Zero Drift (with C-Jam Mode active)
Supports SMPTE Timecode and Genlock / Wordclock Sync
Full ACN™ (Ambient Communication Network) compatability
OLED display with button operation
USB-C port for MIDI Timecode, battery charging and connection to LockitToolbox
Customizable TC and Sync Offset
Changeable battery (NP-50 Li-Ion included)
Approx. 17h runtime
Robust aluminium housing
$1,144.00
Highly accurate Timecode & Sync generator, Zero Drift (with C-Jam Mode active), Supports SMPTE Timecode and Genlock / Wordclock Sync, Full ACN™ (Ambient Communication Network) compatability , OLED display with button operation, USB-C port for MIDI Timecode, battery charging and connection to LockitToolbox, Customizable TC and Sync Offset, Changeable battery (NP-50 Li-Ion included), Approx. 17h runtime, Robust aluminium housing
Related products
-
Audio
AUDIX D6 Microphone For Kick Drum, Floor Tom, Bass Cabs and Leslie Low Cardioid
PROFESSIONAL DYNAMIC INSTRUMENT MICROPHONE
The D6 dynamic instrument microphone is used for stage, studio, and broadcast applications. Designed with a Cardioid pickup pattern for isolation and feedback control, the D6 drum microphone is equipped with a VLM™ diaphragm for natural, accurate sound reproduction.
Lightweight, compact, and easy to position, the D6 Cardioid microphone is an excellent choice for miking instruments requiring extended low-frequency reproduction such as kick drums, large toms, and bass cabinets. The D6’s transformerless design, low impedance, and balanced output allow for interference-free performance.
Designed, machined, assembled, and tested by Audix in the USA.
What’s in the box?
- 1x D6 Instrument Microphone
- 1x DCLIP Microphone Clip
- 1x P1 Carrying Pouch
Specs:
- Transducer Type: Dynamic
- Frequency Response: 30 Hz – 15 kHz
- Polar Pattern: Cardioid
- Output Impedance: 280 ohms
- Sensitivity: 0.8 mV / Pa @ 80 Hz
- Capsule Technology: VLM Type E
- Off-Axis Rejection: >20 dB
- Maximum SPL: ?144 dB
- Power Requirements: None
- Connector: 3-pin XLRm
- Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
- Materials / Finish: Machined Aluminum / Black Finish
- Weight: 254 g
- Length: 117 mm
SKU: ADX-D6 -
Audio
AUDIX F50 All Purpose Vocal Microphone Cardioid
AFFORDABLE ALL-PURPOSE VOCAL MICROPHONE
The f50 multipurpose vocal dynamic microphone embodies a tight and uniformly controlled Cardioid polar pattern which assists in isolating the vocals from the instruments on stage. The f50 is also available with a noiseless, magnetic on/off switch (f50S).
Its warm, natural sound reproduction, resistance to feedback, and ability to handle high SPLs without distortion allows the f50 dynamic vocal microphone to be utilized in a variety of live and studio applications. The f50 Cardioid microphone is an entry-level, all-purpose vocal microphone for small to midsize PA systems.
MODEL VARIATION
f50S dynamic vocal microphone, with On/Off switch.
What’s in the box?
- 1x f50 Vocal Microphone
- 1x Mic Clip
- 1x Carrying Pouch
SKU: ADX-F50 -
Audio, Recording Microphones, Studio Condenser Microphones
Shure PGA27 LC Studio Condenser Microphone
Audio, Recording Microphones, Studio Condenser MicrophonesShure PGA27 LC Studio Condenser Microphone
The Shure PGA27 LC is a professional studio condenser microphone designed to give you clear and great sounding vocal recordings. Easy to use and features a large diaphragm, perfect for vocals. Includes suspension cage and protective case.
SKU: SHR-PGA27LC -
Audio
Shure ULXD4D Dual-Channel Digital Wireless Receiver (H51: 534 to 598 MHz)
- For Large Venues & A/V Installations
- 2 x Digital Audio Channels, 1 Rackspace
- 64 MHz Tuning Range
- Expandable up to 60 Channels
- 2 x Ethernet/Dante Ports
- 2 x RF Cascade Ports
- Audio Summing
- Secure AES-256 Encryption
SKU: SHR-ULXD4DH51 -
Audio, Audio accessories
RODE DeadCat VMP+ Artificial Fur Wind Shield for VideoMic Pro+
The RODE DeadCat VMP+ is a deluxe furry wind cover for the VideoMic Pro+, designed to help minimize wind noise and improve audio recording clarity in windy environments.
The DeadCat VMP+ combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area, whilst ensuring a secure fit specifically suited to the VMP+ Microphone.
The DeadCat VMP+ is only compatible with the VideoMic Pro+ (released September 2017). For other VideoMic Pro models please see the DeadCat VMP and DeadCat VMPR.
SKU: ROD-DEADCATVMP+
