-
×
Nanlite BH-FZ60 Battery handle NPF
1 × $15.00
Subtotal: $15.00
Battery adapters and DC couplers
Core SWX Battery Charger for NP Flatpack – SmallHD Focus
For Core SWX NPF-SHD L-Series Battery
2-Prong Wall Plug to Barrel Connector
$38.00
The Core SWX Battery Charger for NP Flatpack – SmallHD Focus is a simple portable charger for the Core SWX NPF-SHD L-Series NPF Flat Pack Battery for SmallHD Focus Monitors. The Core SHD-PLU provides charge to the Core SWX NPF Flat Pack via the power point. The charger has the AUD/NZ plug
Related products
-
Battery adapters and DC couplers
Nanlite BT-BA-SNP/DC Battery adaptor NPF
Attach a pair of NPF batteries to extend the runtime of your Pavotube 15C or 30C.
The Nanlite BT-BA-SNP/DC can be easily mounted to a light stand or boom, and provide power to a high mounted Pavotube or Forza. The 15V DC output is designed for the Pavotube 15C, and Pavotube 30C, Forza 60, and Forza 60B.
A pair of NPF970 batteries mounted onto this adaptor will provide 88Wh of capacity. That is nearly as much as a small (98Wh) V-Mount battery.
SKU: NAN-NNBASNPDC -
Battery adapters and DC couplers
Tether Tools Case Relay Camera Coupler CRN5B for Nikon
- More cost effective than purchasing multiple proprietary camera batteries
- Power sources are non-proprietary. Power your camera with the same 5V battery you use to charge phones or tablets.
- Never need to charge camera batteries again. And never run out power.
- Compatible with most Canon, Nikon, Sony, Panasonic, Fujifilm, and Olympus cameras. Check to confirm your camera model is supported.
- A Case Relay Camera Power System (sold separately) is required to use the Relay Camera Coupler.
SKU: TET-30.CRN5B -
-
Battery adapters and DC couplers
Dynacore D-2BS-24 Converter V-Lock 14.8V input to 24V output
D-2BS/A-24 is a power station designed to utilise two 14.4 volt V-Lock batteries creating a power source outputing power for any device needing 24Volts, such as an LED panel.
It can supply up to 240Watt output (24V, 10A).
Designed to work with equal power batteries where a larger capacity is preferredLCD Display indicates Output Voltage
The unit has a Low Voltage Indicator LED to warn of potential problems shown here:
Color Red=Under/Over Voltage
Color Green=Good
Green Blinking=Battery LowOutput is via 3 Pin Female XLR Output
24V, 10A, 240W(Max)A Hexagon connector can be mounted to a stand using a super clamp or convi clamp.
SKU: DYN-D-2BS-24
