V-Mount plate for Sony FX9
Hotswap between onboard battery & 4Pin XLR DC in
19.5v Camera output
Two D-Tap AUX outputs
LED battery level indicator
Premium quality aluminium construction
$862.40
The Core SWX Battery V-Mount Plate for Sony PXW-FX9 attaches directly to the rear of the camera and connects via a DC output cable. It also provides a 4-pin XLR input to allow for hot-swapping. Plug in a 4-pin XLR external power source and you can swap out your V-mount battery. The plate secures to the camera using screws provided on the back of the camera, under the removable cover plate on the rounded corner. At the same time, a protruding U-shaped component on the bottom of the unit inserts into the camera’s battery slot. The DC cable provides a 19.5V output that’s compatible with the camera. An LED on the side of the plate provides warning of low battery status. When the plate is not in use, the DC cable can be kept inside a dedicated compartment that’s on the interior side of the plate.There are also two D-Tap outputs for powering accessories. A USB port is also available for firmware updates. The plate is made of durable aluminium.
This adapter allows you to adapt a Sony L Series battery plate (such as the one built into the various Z CAM cameras) to a V-mount battery plate.
This allows you to use the much greater battery life of a V-mount battery to power your camera setup, keeping battery swaps to a minimum.
This is also the perfect solution to power smaller accessories that traditionally use lower capacity L Series batteries such as smaller LED Light Panels or external monitors for focus stations.
The Type II version is designed to be more compact to put less stress on the Sony L-Series contact pins, but can interfere with some of the ports on Z CAM camera bodies.
We recommend Type I plates for users who foresee this being an issue.
1. Standard V mount fits most V mount batteries.
2. Dual D-Tap output ports and DC output ports.
3. On/off switch for easy use.
4. Dual rod clamp suits 15mm rail support system.
5. Multiple built-in 1/4”-20 thread holes for accessory attachment.
This 15mm LWS rod adapter allows you to mount your Mini and/or Pocket V-Mount Battery Plate to any 15mm LWS rod system to allow you to comfortably attach a V-mount battery to your setup.
The compact design of this adapter and battery plate makes it a perfect solution for mounting a V-Mount battery to a smaller camera body without adding the additional weight traditionally associated with larger battery plates.
This Rod Adapter also allows you to mount the Mini/Pocket V-Mount Battery Plate, horizontally, vertically, or flat against the rods.
1. The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery’s power port(s).2. Two stoppers prevent the battery from twisting when attached.3. It features multiple 1/4-20″ countersinks, M3 countersinks, M4 countersinks, 1/4-20″ thread holes, M4 thread holes, and an ARRI 3/8″ -16 thread hole to attach a dual rod clamp, a magic arm, or other accessories.4. It supports a variety of different installation ways and is compatible with the Blackmagic URSA mini.
Pelican 1010 Micro Case Clear With Yellow 
RocknRoller Solid Deck for R8, R10 & R12 Carts 
SmallRig V Mount Battery Mount Plate 2988 
