V-Mount plate for Sony FX9
Hotswap between onboard battery & 4Pin XLR DC in
19.5v Camera output
Two D-Tap AUX outputs
LED battery level indicator
Premium quality aluminium construction
$770.00
The Core SWX Battery V-Mount Plate for Sony PXW-FX9 attaches directly to the rear of the camera and connects via a DC output cable. It also provides a 4-pin XLR input to allow for hot-swapping. Plug in a 4-pin XLR external power source and you can swap out your V-mount battery. The plate secures to the camera using screws provided on the back of the camera, under the removable cover plate on the rounded corner. At the same time, a protruding U-shaped component on the bottom of the unit inserts into the camera’s battery slot. The DC cable provides a 19.5V output that’s compatible with the camera. An LED on the side of the plate provides warning of low battery status. When the plate is not in use, the DC cable can be kept inside a dedicated compartment that’s on the interior side of the plate.There are also two D-Tap outputs for powering accessories. A USB port is also available for firmware updates. The plate is made of durable aluminium.
1. Standard V mount fits most V mount batteries.
2. Dual D-Tap output ports and DC output ports.
3. On/off switch for easy use.
4. Dual rod clamp suits 15mm rail support system.
5. An adjustable extension arm can quickly reposition the battery adapter plate.
6. Multiple built-in 1/4”-20 thread holes for accessory attachment.
1. The plate utilizing a standard V mount fits most V mount batteries to provide greater battery life for your camera rig with your battery’s power port(s).2. Two stoppers prevent the battery from twisting when attached.3. It features multiple 1/4-20″ countersinks, M3 countersinks, M4 countersinks, 1/4-20″ thread holes, M4 thread holes, and an ARRI 3/8″ -16 thread hole to attach a dual rod clamp, a magic arm, or other accessories.4. It supports a variety of different installation ways and is compatible with the Blackmagic URSA mini.
This 15mm LWS rod adapter allows you to mount your Mini and/or Pocket V-Mount Battery Plate to any 15mm LWS rod system to allow you to comfortably attach a V-mount battery to your setup.
The compact design of this adapter and battery plate makes it a perfect solution for mounting a V-Mount battery to a smaller camera body without adding the additional weight traditionally associated with larger battery plates.
This Rod Adapter also allows you to mount the Mini/Pocket V-Mount Battery Plate, horizontally, vertically, or flat against the rods.
This V mount battery plate attaches to the base of the post of the Tilta Float System to provide power for your gimbal setup. Two V mount battery plates can be attached to the plate (one on each side) and it attaches to the post via a very simple NATO rail connection.
*The plate itself does not have any power outputs*
LARH Textile Grid Quarter (1/4) Silent White 20' X 20' 
Rosco Paint DigiComp 5750 Blue 19L 
Rode Boompole Telescopic Microphone Boom Pole 
Tilta Gold Mount Battery Plate for Ring Grip 
